Python library to enable 128x32 pixel OLED for Raspberry Pi (both 32 and 64bit).

This repository has been broken out to work as a standalone service and will work on a standard Raspberry Pi running Raspian.

Welcome	HA Splash	CPU Stats	RAM Stats	Storage Stats	Network Stats	Exit Screen

Aswell as the above screens, you can configure a static custom screen which can be fixed or animated.

If the configured text is greater than the screen size, it will scroll across the screen unless you configure it to display as lines.

Scrolling animations also supports configurable apmlitude enabling the text to wave up and down as it scrolls.

This screen can take variables to help personalise your view:

"Static_Screen_Text": "Today is {datetime}, running hassio verion {hassio.os.version} on {hostname} with IP {ip}"

The following variables are supported

This addon leverages the original Adafruit Python SSD1306 and GPIO libraries, which have been deprecated. However, I have taken the nessassary parts out of this and bundled them into this I2C module avoiding the need for GPIO and relying on the Raspberry Pi's I2C setup.

Original Repo: https://github.com/adafruit/Adafruit_Python_SSD1306

Originally designed specifically to work with the Adafruit SSD1306-based OLED displays ----> https://www.adafruit.com/categories/98

Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Special thanks to Gareth Cheyne for his intial version of this project. After the removal of GPIO support from Home Assistant, the referenced addon no longer worked for me, so I took the initial project apart, and smashed it together with the Adafruit I2C libraries removing the GPIO requirements.

Additionally, the original build didn't work on 64bit versions of the Raspberry Pi, nor would it work as a stand alone service.

This repository has been broken out to work as a standalone service and will work on a standard Raspberry Pi running Raspian.

Any screens which are dependent on Home Assistant (e.g. Splash) will be automatically disabled

Home Assistant variant of this build can be accessed from HomeAssistant_Addons

You can use 0.91 Inch 128X32 I2C module, as long as it is registered on /dev/i2c-1 which is the Rasperry Pi default.

I purchased this MakerHawk I2C OLED Display Module I2C Screen Module 0.91" 128X32 I2C

- PIN1 : Power (3.3V / VCC)
- PIN3: SDA (I2C Data)
- PIN5: SCL (I2C Clock)
- PIN14: Ground (0V)

Enable I2C on the Raspberry Pi

sudo raspi-config
# Interface Options > I2C

Those who want to get started quickly and conveniently may install the RPI_I2C_OLED using the following command:

curl -sSL https://raw.githubusercontent.com/crismc/rpi_i2c_oled/v1.0.2/basic-install.sh | sudo bash

This will download the latest release, and install it as a service. Once run, you can control the oled service by the following:

sudo service oled start
sudo service oled stop
sudo service oled restart

Initial apt-get installs:

sudo apt-get install i2c-tools git vim

Test I2C device is working:

$ i2cdetect -y 1

Install Python3 dependencies

sudo apt-get install python3-dev python3-smbus python3-pil

Checkout this code

git clone [email protected]:crismc/rpi_i2c_oled.git
cd rpi_i2c_oled

Test OLED

cd rpi_i2c_oled
python3 display.py

Copy the repo file to /etc:

sudo cp -ri ../rpi_i2c_oled /etc

Create a sym link of the service file in /etc/systemd/system, and reload it

sudo ln -s /etc/rpi_i2c_oled/oled.service /etc/systemd/system/oled.service
sudo systemctl daemon-reload

Test it out

sudo service oled start
sudo service oled stop
sudo service oled restart

Start on boot

sudo systemctl enable oled.service

You can modify the display of the content by editing the options.json file.

By default the options.json is loaded from the same directory as the display.py.

Note: The keys are case insensitive

If you want to change this location, simply pass in the path to the desired config using the flags -c or --config:

python3 display.py -c /path/to/options.json

or

python3 display.py --config /path/to/options.json

As logging is initiated before the party begins, log levels are defined outside of the options.json.

Therefore, to enable debugging, when running display.py add -d or --debug to the command.

e.g.:

$ python3 display.py -d
INFO:Config:Loading config: /etc/rpi_i2c_oled/options.json
INFO:Config:Home Assistant is not supported on this instance
INFO:Config:'welcome' limited to 5 iterations
INFO:__main__:'welcome' is being processed
INFO:Screen:'WelcomeScreen' created
INFO:Screen:'WelcomeScreen' rendering

As part of the library leveraged to produce this service, the below text needs to be copied... (yawn)

However, you can ignore the install instructions below as they've been replaced by the above.

Original Adafruit Repository

his library has been deprecated! We are leaving this up for historical and research purposes but archiving the repository.

We are now only supporting the use of our CircuitPython libraries for use with Python.

Check out this guide for info on using OLEDs with the CircuitPython library: https://learn.adafruit.com/monochrome-oled-breakouts/python-wiring

Python library to use SSD1306-based 128x64 or 128x32 pixel OLED displays with a Raspberry Pi or Beaglebone Black.

Designed specifically to work with the Adafruit SSD1306-based OLED displays ----> https://www.adafruit.com/categories/98

Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!

sudo python -m pip install --upgrade pip setuptools wheel
sudo pip install Adafruit-SSD1306

Or alternatively:

sudo python -m pip install --upgrade pip setuptools wheel
git clone https://github.com/adafruit/Adafruit_Python_SSD1306.git
cd Adafruit_Python_SSD1306
sudo python setup.py install

Written by Tony DiCola for Adafruit Industries. MIT license, all text above must be included in any redistribution