adonno / home-assistantconfig Goto Github PK

I have a UPS that's connected to My Synology Nas via USB
I've tried to get the Integration up and Running but no dice

since my main view still is the floorplan and I currently ignore the temperature table on the left-hand side I am going to add state badge with the temperatures of each room that will allow me to presales move the badge to the location where the temperature is measured

The EspHome device I use for my saltlevel also has a temperature sensor. This sensor currently seems to be off by ~3° C
I have to recalibtare it but first I have to fix : #27 that runs on the same D1mini

If the outside lights are already on switch on the garage light when opening the garage.
Switch off after 5 minutes if still on

So rather than using smart locka just to know the state of the garden doors if they are locked or not, i will hack aqara door sensors

Whenever newsbroascast start the volume should be raised and lowerd 5 minutes after

https://github.com/adonno/Home-AssistantConfig/blob/master/automations/phone_status_notification.yaml

I would like to accomplish the same. But I don't have a sensor.phone which goes to Idle, Dialing, ringing etc. I have an iOS device too, and use the latest iOS app version.

I figured out a sensor.activity, but it shows "walking, standby, unknown" states. Tried calling, but it wont change the state to dialing or ringing.

Very curious on how you did this :)

Hey there,

I am missing the config/entities/tts folder. How do you got that configured?

not sure if I should use a D1 mini running esphome with relays ,
Or maybe a Shelly ?
or just use a Gosund Plug ...

Things to consider :

• 3 speeds
• oscillation

(timer gan be ignored sinc that would get controled by HA)

Today the ha team announced that support for supervised on generic linux will get dropped .

I will have to move it and will document it here

https://twitter.com/home_assistant/status/1259217072795639814?s=21

when closing the covers at night check whether a window is open and warn
add a timer of 5 minutes before closing and an actionable notification

We have a fan heater in our bathroom that has to be turned on manually and turns of automatically as soon as we hit 25 degrees.

This should be enhanced to turn on again as soon as the temperature drops as long as the lights are on

My printer currently has LED Strips on it's frame I mostly use them for time-lapses or when I watch the prints overnight via Octoprint.

Since HA knows the status of the printer I could add a D1 mini or a ESP01 running espHome with a relay to turn the LEDs on when the printer isn't idle or off

Seems that i am having issues to control the relay that has to open my garage door
After a power cut the esp fails to boot as soon as i disconnect the relay it boots just fine

Switch on the outside lights when opening the front/back door and it's dark outside

My garden hose holder hangs just above the mains breaker box. That isn't much of an issue. However it would become one if i where to forget the valve open and left after watering the plants

I will use a aqara open/close door sensor to accomplish this.

Manage the status led whith good night and away
Leds should not be enabled however when coming home one ahould be reminded taht some deviced need to get checked

Like dish wahaer etc

Currently, my mesh is quite unstable I need to find a way to add more waypoint for my mesh to become more reliable

Whenever I come home I want to get notified of whats' left to do in the house:
I will use google TTS since I am using Chromecast audios as my Multiroom broadcasting devices

Triggers:

• Entrance Door Opens
• Door from the Hall to the Garage Opens
• Ask Assitant (alexa/Google)

Conditions:

• None is home except the person that just arrived or play it on the entrance door loudspeakers only

Devices :

• Trash bins
• Dish wahser
• Wahsing Mashine
• Clothes Dryer
• Mail Box

Additional Notifications:

• When the inhabitants left and where they currently are if it's a known zone,
• Overall house temperature

Bonus:

• Different information based on the device triggering the automation

Whenever i turn off all the lights (the light on the upper hall or in the bedroom) being the last the front door should be locked

I have a Multiroom System that is currently working but that's all
It isn't working to its full potential and I have multiple speakers to a 2 channel amplifier

Audio Source for the amps: Chromecast Audio

A special mode for when baby goes to bed , opposed to good night that shuts down th ewhole house

after successfully adding my home-connect devices I have to add av view in Lovelace for them

I would like to ask My Google assistant device for the temperature outside the balcony and to get the correct temperature

not sure if this can be done directly with The assistant or if I have to create a script in ha

I want to get notified about open doors/windows when leaving the house or going to bed
depending on what door it is, get a critical notification.

This then can be extended to other states/sensors, devices etc

Add a sensor to the shower door to check whether its open or not

add sensor on top of the windows to check in what position they currently are...
14 Window/door sensors to be added at some point

When I leave my office desk I sometimes happen to forget to turn off my Desk LEDS.
Since I have some GOSUND SP1 laying around I can use on of these on the power supply

Have to find a way on how to detect the presence. The desk has 3.6m length and fits 2 people.

Objective

We have a baby diaper trash bin and we can't see when it's full. Based on that id' like to get a notification to let me know before it's full so I don't have to stick up my head in it 💩 .

• Identify open/close
• Count diapers
• Add a way to reset the counter
• Notify on threshold reached
• Notify on resets
• Display diaper count on switch
• Flash red light on the wall switch when threshold reached

Based on the recent modification review the current conditions/triggers and adjust to the most recent iteration

add a sound to the home loudspeaker notification system with a sound of a mailbox when now mail arrives

https://community.home-assistant.io/t/wth-can-i-not-change-log-verbosity-from-the-ui/220727/3?u=adonno
mentionned by @tom_l in the HA community forum

Hello, I did not know how to contact you so I created an issue here, sorry!.
Thank you for sharing your work.
I have a question about your dashboard. Did you generate the lovelace files from your ressources or did you do everything manually?

Ojective

I'd like to create a notification to know when my trash bins have been emptied
I've found this idea quite useful
jcallaghan/home-assistant-config#53

My Repo is so Out of Date that I have to Update it. My GitLab Ci is completely failing