Dependencies are unclear to me - Docker /alpine/v3.16 about zigpy-znp HOT 2 CLOSED

I have created the virtual environment, according to the instruction.

Just run the command directly, you don't need to install anything. zigpy-znp is already installed within Home Assistant OS.

Also, you don't actually need to drop into the CLI to perform an energy scan, or to reset anything. Forming a new network with ZHA does both and securely picks a randomly-generated network key, in addition to scanning for a new channel automatically (in 2023.5.0 or above).

from zigpy-znp.

@puddly thank you very much indeed and I mean it. I spent at least 6 hours before I wrote this message.

To save others time, I have some suggestions, after understanding it. Don't get mad at me I just try to help.
In a situation where I don't know what am I doing I follow your guidance, and this is how it came across for me.

https://github.com/zigpy/zigpy-znp on this README.md it is written:

Home Assistant

Stable releases of zigpy-znp are automatically installed when you install the ZHA component. (To keep the terminology within HA, it is in the menu called integration) so I suggest a change like:
Stable releases of zigpy-znp are automatically installed when you install the Zigbee Home Automation (ZHA) integration.
At first use of ZHA, I would write it out.

Could you add another line like:
So, you can test it right away no further install is needed.
In HA you can skip the "installation section" and go to the section: Tools

This is also true for: zigpy-cli README.md
On zigpy-cli, a reference that it is already installed is missing here.

I stumbled over "no install is needed", mainly on this site TOOLS.md.
https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md
zigpy-znp is already installed by Home Assistant's ZHA component (To keep the terminology within HA, it is in the menu called integration).

CC2531 if I look straight for this, I am asked one more time to: "Once you are inside of the virtualenv (if you created one)"
https://github.com/zigpy/zigpy-znp/blob/dev/TOOLS.md#network-migration-for-coordinator-upgrades

As you have recommended in your post, I unistalled and re-installed ZHA. The third option upon install was to create a new network and a new key 👍

Thank you for the software, I will now test the "Flash write" on CC2531 :)

from zigpy-znp.