Wire the head lights and tail lights about jeeps HOT 22 CLOSED

• Purchased new plugs for the headlights
• Primed and painted the buckets and brackets

from jeeps.

I'm going to run 3 circuits to front of the jeep:

• headlights (along with tail lights)
• running lights
• accessory lights

from jeeps.

Wiring harness is built and in place. I also have lights and everything pretty much ready to be put together.

from jeeps.

Installed the buckets and ran wires to the lights.

from jeeps.

Turns out that my wiring harness wasn't long enough to reach the new location of the fuse box. I'll be rebuilding the harness this afternoon.

from jeeps.

Combining this with the tail light wiring issue.

from jeeps.

Running lights should be part of this issue too.

from jeeps.

Wired in the fuel pump, ignition and ran a wire for the horn in the future. Also ran power and ground.

from jeeps.

Ran the harness for the headlights and put together the plugs.

from jeeps.

The headlights are in and they seem to work!

from jeeps.

Removed the original rear wiring harness over the weekend and started to run the new harness to the rear of the jeep.

from jeeps.

I'm going to change up the headlight harness and install a terminal strip to branch out the light circuits.

from jeeps.

The brake light switch is now wired to a relay. Also, replacing the headlight splices with terminal blocks, they should be here next week.

from jeeps.

Modified the terminal block and wired in the headlights to it. Started on the tail light terminal block and wiring that in.

from jeeps.

Built wiring harness for the rear lights.

from jeeps.

Installed rear light harness and passenger side tail light.

from jeeps.

Started wiring in the front LED lights.

from jeeps.

Everything except for the ground is wired for the LED lights.

from jeeps.

LED lights are grounded. Also cleaned up the grounds for the headlights.

from jeeps.

This project depends on #9 Fix and restore license plate bracket

from jeeps.

Started running rear wiring harness and mounted the the terminal block for the rear lights.

from jeeps.

Finished wiring in the tail lights this afternoon, everything works. Brake lights work too.

from jeeps.