Undesired preserving state of IOIO pins on android app closure about ioio HOT 2 CLOSED

As far as my understanding of the IOIO firmware goes, basically works as a FIRMATA. This means the app says "Pin 5 HIGH" and the IOIO board execute the action.

Maybe this behaviour is due to not having a pull Down or pull Up circuit the IOIO board already implements pull down and pull up like this:

private DigitalInput motorPin1_;
private DigitalInput motorPin2_;

motorPin1_ = ioio.openDigitalInput(6, DigitalInput.Spec.Mode.PULL_DOWN);
motorPin2_ = ioio.openDigitalInput(7, DigitalInput.Spec.Mode.PULL_UP);

Give it a try and lets us know if works.

from ioio.

Thanks @techboycr , but I have made other work around since posting this, and don't have time to dive back into it at the moment, but if there ever comes a time, I will be sure to reference what you have said.

from ioio.