load-generator sends request to <code class="notransl

Output of tap command suggested in "<a href="https://

Service mesh doesn't show topology about experiments HOT 3 CLOSED

yb172 commented on September 6, 2024

Service mesh doesn't show topology

from experiments.

Comments (3)

yb172 commented on September 6, 2024

Interestingly enough linkerd routes svc/gen-gateway -n gen gives nothing - says service profile not found

from experiments.

yb172 commented on September 6, 2024

Output of tap command suggested in "troubleshooting" section:

$ linkerd tap deploy/gen-gateway -o wide -n gen | grep req
req id=132:53 proxy=out src=10.36.0.46:59448 dst=10.39.254.147:10000 tls=no_identity :method=POST :authority=10.39.254.147:10000 :path=/wordgen.InternetsWordGenerator/GetWord src_res=deploy/gen-gateway src_ns=gen
req id=132:54 proxy=out src=10.36.0.46:59458 dst=10.39.254.147:10000 tls=no_identity :method=POST :authority=10.39.254.147:10000 :path=/wordgen.InternetsWordGenerator/GetWord src_res=deploy/gen-gateway src_ns=gen
req id=132:55 proxy=out src=10.36.0.46:38484 dst=10.39.240.160:10000 tls=no_identity :method=POST :authority=10.39.240.160:10000 :path=/wordgen.WordGenerator/GenerateWord src_res=deploy/gen-gateway src_ns=gen

Looks like paths are there, but authority header contains ips...

from experiments.

yb172 commented on September 6, 2024

And it looks like this is caused by the way I'm doing service discovery: https://github.com/yb172/experiments/blob/master/kube/testtools/config.yaml#L4

from experiments.

Recommend Projects