What is NotifyPort about at HOT 8 CLOSED

Hi!

There are two ports: for giving commands and for listening notifications

AT starts watching on the notification port, so it could react on various events about incoming SMS, etc
https://github.com/xlab/at/blob/master/at.go#L223

from at.

and if i m in windows
i put CommandPortPath COM1 and NotifyPortPath COM1 ?

from at.

@ssadok I'm not sure about that, sorry. I'll check when i get windows

from at.

https://github.com/xlab/at/blob/master/at.go#L374
i think that port if is the same it will be busy.

from at.

@ssadok it cannot be the same, there is no multiplexing. Usually Huawei modems create 3-5 serial devices in the system.

from at.

i use this
http://www.ebay.com/itm/GSM-GPRS-Modem-Pool-16-ports-for-Wavecom-Q2406-Module-USB-AT-Commands-Dual-Band-/231693083428

from at.

@ssadok looks cool, but it only provides one serial port?

Okay, I made changes in d1f8cd8 so it won't connect to notification port if it's not provided in the config. I guess it would work OK for you if you have only commands port at COM1.

By the way, AT command sequences can differ from vendor to vendor, the commands I implemented are for Huawei E173 only, but it's a good example how to implement yours. See the specs for the device.

Good luck.

from at.

thank you i will test it and get back to you shortly

from at.