"Failed to Load config" on linux with the head of iceman proxmark3 about proxmark3gui HOT 3 CLOSED

Hi. You need to follow these steps

1. Go to the Settings panel, set the start argument to -p /dev/<port> -f. The client will remember these settings.
2. Set the config file path, like ../config/config_rrgv4.13.json, then connect
3. If the GUI still can't connected to the hardware, check the Keep the client active even the PM3 hardware is disconnected

from proxmark3gui.

Thanks it works! maybe having some kind of sane defaults might help the usability :)

from proxmark3gui.

OK
Thanks for your advice.

from proxmark3gui.