Main Status Entity - Clarification about hassio-ecoflow HOT 4 CLOSED

I have confirmed the same phenomenon here.

It seems to become 6 when the battery is 100% regardless of the input/output. We will address this so that it is not considered an error.

from hassio-ecoflow.

Looking at diagnostics - I am seeing a battery_main_error of 6 under EMS.
What does this mean?

"ems": {
      "battery_main_error": 6,
      "battery_main_version": "1.0.2.68",
      "battery_main_level": 100,
      "battery_main_voltage": 33.12,
      "battery_main_current": 4294967271,
      "battery_main_temp": 31,
      "_open_bms_idx": 1,
      "battery_capacity_remain": 9589,
      "battery_capacity_full": 9450,
      "battery_cycles": 2,
      "battery_level_max": 80,
      "battery_main_voltage_max": 4.128,
      "battery_main_voltage_min": 4.112,
      "battery_main_temp_max": 31,
      "battery_main_temp_min": 28,
      "mos_temp_max": 32,
      "mos_temp_min": 32,
      "battery_main_fault": 0,
      "_bq_sys_stat_reg": 128,
      "_tag_chg_amp": 15000
    }

from hassio-ecoflow.

I think I have found the issue even though I dont yet know what a battery_main_error of 6 under EMS means.

I am running my Ecoflow River's as UPS so AC connected to mains and AC out to power devices. Once the battery is charged, the Ecoflow River's run in a bypass mode.

I was able to remove the "Problem" status by failing over the mains so effectively things are running on battery. Restore mains and it charges the battery back up until it hits 100% and then the status is "Problem" again. It could be the way the API is reading things as at 100% with the mains back on and the battery charged - its just bypassing power so shouldnt be showing as "Problem".

Hope this helps resolve the issue.

from hassio-ecoflow.

Perfect - Thanks. Let me know if you need me to run any further tests :)

from hassio-ecoflow.