voodoobrew101 Goto Github PK

am32-multirotor-esc-firmware

Firmware for stm32f051 based speed controllers for use with mutirotors

blheli-configurator

Cross-platform application for BLHeli firmware flashing and configuration

fysetc-voron-2

FYSETC Kit - Voron-2 kit

klipper-config

Tenlog IDEX D3

media

remote_control_power_wheels_project

This program is intended to allow 2 inputs and one output for making a remote control power wheels Input one is a pwm signal from the remote reciever Input two is variable voltage from a 5v hall sensor pedal. I think my pedal is not great because the voltage range is pretty small. Output is in the form of a pwm signal that works with RC car speed controllers. There is a govenor conected to an aux channel that agjust the max speed the pedal will alow. I use spektrum remotes wich have a signal range of 1100-1900 pwm The failsafe for spektrum recievers is 1500 if the remote is not turned on. This Sets the Govenor to 50% when the remote is turned off The remote off govener speed can be adjused if your esc has a throttle curve. Set the 50% mark of the throttle curve to what you want the throttle off governor to be. My Forward/Neutral/Reverse switch is 3 position SPDT On-Off-On

tl-d3

Marlin dual X carriage 3d printer firmware source code for tenlog-D3