Issue on PRTG with Custom Sensor about advanced-prtg-sensors HOT 10 CLOSED

Sure,
Might you please execute the Script in cmd shell and share the result?
Sensor log will also be awsome.

from advanced-prtg-sensors.

Report of Sensor: File "C:\Program Files (x86)\PRTG Network Monitor\custom sensors\EXEXML\PRTG.ps1" not found.

Report of Sensor.Data:
Data['blockedsens'].asString := '';
Data['canlinux'].asString := '0';
Data['channelinfos'].asString := '{}';
Data['channelnames'].asString := '';
Data['exefile'].asString := 'PSx64.exe';
Data['exeparams'].asString := '-f=PRTG.ps1 -raw';
Data['fastcount'].asString := '0';
Data['host'].asString := '172.16.3.2';
Data['hostv6'].asString := '';
Data['inerror'].asString := '1';
Data['interfacenumber'].asString := '';
Data['inum'].asString := '';
Data['ipversion'].asString := '0';
Data['isexesensor'].asString := '1';
Data['lastmsg'].asString := '#Y2 @#O233 @#O231[Invalid JSON.]';
Data['lastuptime'].asString := '0';
Data['linuxlogindomain'].asString := '';
Data['linuxloginpassword'].asString := '***';
Data['monitorchange'].asString := '';
Data['mutexname'].asString := '';
Data['reboot'].asString := '42774.6879382407';
Data['reqmsginterval'].asString := '60';
Data['resultfile'].asString := 'Result of Sensor 4534.txt';
Data['sensorid'].asString := '4534';
Data['simulate'].asString := '0';
Data['timeout'].asString := '60';
Data['tlsexplicit_default'].asString := '';
Data['tlsexplicit_ftp'].asString := '';
Data['tlsexplicit_imap'].asString := '';
Data['tlsexplicit_pop3'].asString := '';
Data['tlsexplicit_port'].asString := '';
Data['tlsexplicit_smtp'].asString := '';
Data['uptimecount'].asString := '0';
Data['usednstime'].asString := '0';
Data['usewindowsauthentication'].asString := '1';
Data['windowslogindomain'].asString := '
Data['windowsloginpassword'].asString := '
Data['windowsloginusername'].asString := '
Data['writeresult'].asString := '1';

from advanced-prtg-sensors.

That is the powershell command ran through CMD, I have xxx out the point which are private.

Thanks for your help with this.

X:>powershell "& 'C:\Program Files (x86)\PRTG Network Monitor\custom sensors\EX
EXML\PRTG.ps1'"
Starting to Process Connection to XXXXXXXXXX
Connecting BRHost...


Successful-Backups
1
1
1


Warning-Backups
0
1
1
0
1


Failes-Backups
0
1
1
0
1


Failed-Backups
0
1
1
0
1


Running-Backups
0
1
1


Successful-BackupCopys
0
1
1


Warning-BackupCopys
0
1
1
0
1


Failes-BackupCopys
0
1
1
0
1


Failed-BackupCopys
0
1
1
0
1


Running-BackupCopys
0
1
1


Idle-BackupCopys
0
1
1


Successful-Replications
0
1
1


Warning-Replications
0
1
1
0
1


Failes-Replications
0
1
1
0
1


Failed-Replications
0
1
1
0
1


Running-Replications
0
1
1


TotalBackupRead
299
Custom
GB
1
1


TotalBackupTransfer
42
Custom
GB
1
1


REPO - xxxxx
48
Percent
1
1
20
10
1


REPO – xxxxx2
17
Percent
1
1
20
10
1

from advanced-prtg-sensors.

Hi,
might you please verify that the PS1 Script is on all Probes and the Core available.

The PRTG Sensor Log reports that PSx64.exe can not find it:

Report of Sensor: File "C:\Program Files (x86)\PRTG Network Monitor\custom sensors\EXEXML\PRTG.ps1" not found.

from advanced-prtg-sensors.

HI,

When i change the name of the script and ran it again i got the below error.
"The system cannot find the file specified" which is when it had a false name.

Just to confirm, the server which has the probe on is where i place the PSx64.exe and the PS1 script? all the data from the probe goes back to our central server offsite.

Thanks

from advanced-prtg-sensors.

Hi,

The manual execution is not the Problem. I think the execution vie PRTG is the Problem.
Is on all Probes where the PSx64.exe also the PS1 script located?

Yes, you are right the Probe for the Device where the Sensor is created executes the Script.

from advanced-prtg-sensors.

This is how its set up on PTRG, please could you advise on this situation?

Thanks

from advanced-prtg-sensors.

I have now resolved this issue thanks.

from advanced-prtg-sensors.

Might you please share the Solution?

from advanced-prtg-sensors.

On this instance i recreated the PS1 file and edited DNS in the code to the IP address. This is now running however i'm still getting the Odd timeout which is frustrating...

Thanks

from advanced-prtg-sensors.