Hi Shouldn't U_CELL_NET_RAT_NB1 be added to the SARA_R5 RATs since t

SARA-R510S-01B NB1 support about ubxlib HOT 3 CLOSED

u-blox commented on June 4, 2024

SARA-R510S-01B NB1 support

from ubxlib.

Comments (3)

eeFLis commented on June 4, 2024 1

Hi Rob
Thanks for the quick reply. This way it works.

from ubxlib.

RobMeades commented on June 4, 2024

Hi there: yes, you're right, this is on the TODO list, was trying to figure out the right way to do it in order to avoid duplication. Will move it further up the priority list but to get you working you can change u_cell_private.c:

        U_CELL_MODULE_TYPE_SARA_R5, 1500 /* Pwr On pull ms */, 2000 /* Pwr off pull ms */,
        6 /* Boot wait */, 10 /* Min awake */, 20 /* Pwr down wait */, 15 /* Reboot wait */, 10 /* AT timeout */,
        20 /* Cmd wait ms */, 3000 /* Resp max wait ms */, 4 /* radioOffCfun */, 150 /* resetHoldMilliseconds */,
        1 /* Simultaneous RATs */,
        (1UL << (int32_t) U_CELL_NET_RAT_CATM1) /* RATs */,
        ...

...to this:

        U_CELL_MODULE_TYPE_SARA_R5, 1500 /* Pwr On pull ms */, 2000 /* Pwr off pull ms */,
        6 /* Boot wait */, 10 /* Min awake */, 20 /* Pwr down wait */, 15 /* Reboot wait */, 10 /* AT timeout */,
        20 /* Cmd wait ms */, 3000 /* Resp max wait ms */, 4 /* radioOffCfun */, 150 /* resetHoldMilliseconds */,
        2 /* Simultaneous RATs */,
        ((1UL << (int32_t) U_CELL_NET_RAT_CATM1) | (1UL << (int32_t) U_CELL_NET_RAT_NB1)) /* RATs */,
        ...

from ubxlib.

RobMeades commented on June 4, 2024

We've now fixed this properly on the master branch in commit 1843f8b, hence closing this: please re-open if you still have a problem with this.

from ubxlib.

Recommend Projects