analog inputs or digital inputs don't work now and then about as3glue HOT 2 OPEN

considering the part below ( from the issue ) :
[
Resetting in that way sometimes solves the issue. However if I do it a few
times, the analog inputs are not sensed anymore ( amount of reset times is
not solid, sometimes after 3 times, sometimes 30 ).  
But I can keep reading the digital input
]

Resetting the board physically ( thus by pressing the reset button on the board 
),
solves the analog inputs that are not being sensed. However, I would like to do 
it
with actionscript code. 

Ok, problem seems solved. 
I connected the Arduino through an USB hub. That made it a bit instable I 
think. Now
it works fine. 

Only one question left : 
The arduino.resetBoard() function doesn't seem to do anything. 
The command is received, but the board keeps running the same.