trengtor Goto Github PK

3d-printer

Voron Stuff

arduino_stm32

Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards

bemege

BeMeGe extruder is BMG reverse, optimized for 3d printing

bigtreetech-relay-v1.2

BIGTREETECH Relay V1.2 is an upgrade of the original (BIGTREETECH V1.0). After upgrading, a small MCU was added on the module to make the module more controllable and stable. Besides, we have also increased short circuit detection circuit. After connecting the 5V and GND on the motherboard to the module, if there is a 5V short circuit, the module will immediately power off to prevent damage on the motherboard and the risk of fire caused by short circuit.

btt_skr_13_14_14t_sd-dfu-bootloader

This is a repository of BIGTREETECH bootloaders. The originals are stored under the bootloader_bin/backed_up_original_bootloaders/ directory. This repository also has a bootloader for the SKR E3 TURBO to fix the high pitch sound coming out of the CR10_STOCKDISPLAY it is located on the bootloder_bin/compiled_bootloader_bin/ directory.

ch341eeprom

A libusb based programming tool for 24Cxx serial EEPROMs using the WinChipHead CH341A IC

differential_probe

Modular differential probe (DEDP-100)

diy-layout-creator

multi platform circuit layout and schematic drawing tool

duet_telegram_bot

telegram bot for duet3 frimware

esp32-cam-webserver

Expanded version of the Espressif ESP webcam

esp32-camera

euclid_probe

Euclid probe, a magnetically coupled Z Probe Sled

filament_dryer_rp2040

Heats and dries wet filaments to improve print quality and longevity.

gasherbrum-k3-3d-printer

Open Air or Fully Enclosed, Small Format, Moving Bed, CartesianXY, FDM 3D Printer with Direct Drive Extrusion System

gcodeeditor

Programm for correction of g-code for 3D printing

hevort

Advanced DIY 3D Printer

interfaces-for-wobblex-integration

CADs and STLs that can be adapted to various 3D printers in order to benefit from the best Z wobble management system.

k3d-vostok

K3D VOSTOK 3D printer

ka3005p

Command line tool to remote control Korad, Tenma, RS, Velleman, Stamos, power supplies and other clones.

kicad_series500_compatible_template

Template PCB Series 500 compatible, for kiCAD

klicky-00

The goal of this probe is to give Voron TAP-like consistency with repeatable Z-offset even when changing nozzles.

klicky-probe

Microswitch probe with magnetic attachement, primarily aimed at CoreXY 3d printers

labtools_100mhz-differential-probe

LabTools : Differential Oscilloscope Probe (100MHz+/700Vpp-2.5kVpp)

maple-windows7-driver

Maple-Windows7-x64-driver

marlin-zav-lerdgex

Marlin config for Lerdge-X board

marlin_fb_reborn

MarlinRB - 3D Printer Firmware based on Marlin 3D v2.1, for Flyingbear Reborn with MKS Robin Nano v1.1, MKS Robin Nano v1.3, MKS Robin Nano S v1.3

moli-extruder

The most lightweight BMG dual drive filament extruder

nevermore_micro

Activated Carbon Filters. Bad smells or fumes, or complaints thereof, should not keep you from being a maker!

notouchscreenfirmware

Stripped down version of BIGTREETECH-TouchScreenFirmware which only supports ST7920 emulation (Marlin Mode)

ormerodsensorboard

Z-height sensor board add-on for RepRapPro Ormerod 3D printer