Pinebook Pro: 'Boot to SD card' option (second option) not working about tow-boot HOT 3 CLOSED

This is odd, I've used -002 to boot from SD card successfully.

Have you tried the same operation multiple times, from power off?

Was attempting an SD card boot the first operation from power on?

Another thing to look at, but not sure how much help it will be, is to run run bootcmd_mmc1 in the firmware cosole.

I need to look into it, but I've observed in non-reproducible manners that U-Boot's shell scripting has some sort of weirdness when re-running loops. It might be that it somehow is only trying the last boot method in some limited situations.

from tow-boot.

You are correct. I performed 2 boots from power-off -- boot from USB card reader and boot from SD-card slot -- and both worked as expected. So this is a false report. Thanks for your quick response!
Also, I hope you will continue with these images, such as the SPI flash image. This has worked very well for me.

from tow-boot.

Hm, annoying that there was this one (or maybe more than one) issues booting, but can't be reproduced anymore. Ideally I'd like issues to be reproducible! :)

And you shouldn't worry, I fully intend to continue improving Tow-Boot. Though this is not the main project I'm maintaining, this is why development is a bit slow.

To be fair, since it's been pretty solidly stable I don't have a lot of reasons to spend lots of time working on this :).

from tow-boot.