SoundTrack Frequency-span Analyzer about t3 HOT 3 CLOSED

That's a very good idea. I was thinking about a similar solution for [AudioReaction]. Would you directly use the resulting value, or would you trigger something, if some kind of threshold is exceeded?

from t3.

I think it would be nice to be able to set a spectral range .. to be able to be triggered on threshold .. so for example a selection of frequency between 30hz and 100hz to be triggered at threshold value reached.. Maybe even a selection for each of the most common bands used in audio mixing..

32 to 512Hz
512 to 2,048Hz
2,048 to 8,192Hz
8,192 to 16,384Hz

With a Q value or peak value and gain threshold for each ?
Visual UI would be cool .. but if not possible ..

Freq/Peak/Threshold would work ..

If its not more expensive to use multiple instances of the Op .. even a simple Freq/Peak/Threshold bell filter .. with a range of about 30Hz - 12000Hz would be fine .. then we could set the upper and lower limits.. for different sound ranges on another instance of the Op?

Also it would be really nice to have a simple Env on this operator such as Attack and or Decay?

from t3.

This feature is partially available in v3.3.0 with the [AudioReaction] operator

from t3.