Comments (13)
Happy to announce that the SenseoWifi works with the Senseo Quadrante!
Successfully modded my machine last weekend and it's brewing like a champ now
from senseowifi.
from senseowifi.
@m4rcu5 really! I took apart three-four of them and multiple times during development. Maybe yours was old and the parts hard and brittle? If you ever end up buying a new one contact me and I'll send one of the left-over custom PCBs your way!
from senseowifi.
Everything in this project has been new for me, ordering the parts, ordering a custom PCB, soldering, dealing with firmware and implementing it with MQTT. But after working on it for a long time and with some help I got it up and running yesterday and i'm very happy with it. I am going to add the cup-detector soon. The joke is that I don't even drink coffee, but my girlfriend is really happy with it. My guess is that it will mostly will be used to turn it on in advance when waking up, I don't think that preparing everything beforehand and then making a cup is going to happen a lot, but this will definitely happen when there are visitors.
It is fun to have these functions now, but the biggest part for me was to learn all the new things and get closer to creating something myself later. For example a motorized roller blind.
from senseowifi.
Hallo,
mein ausländisch ist leider sehr miserabel.
Ich habe mir die Platine vor einem halben Jahr zusammen gelötet und in meiner Senseo verbaut. Bei der Gelegenheit habe ich gleich einen Tassenzähler hinzu gefügt welcher aktuell bei 1104 steht. Ganz schön viel Kaffee getrunken. :)
Leider geht bei mir die "Automatik" nicht mehr da mein Tassensensor nichts mehr macht, eventuell ist es neben dem Boiler zu heiß. Ich werde dieser Tage das Gerät nochmals zerlegen und diesen erneuern. Bei der Gelegenheit möchte ich gleich einen Deckelsensor (mir Reedkontakt) verbauen, da ich festgestellt habe das die Senseo auch Kaffee kocht wenn der Pad-Deckel geöffnet ist. Das ist natürlich nicht so schön und mein Bastelwahn sagt das muss geändert werden.
Bei der Gelegenheit mal eine Frage - kann ich den Tassensensor irgendwie über ein MQTT Kommando deaktivieren? Ich habe die Maschine mit meinem Wecker gekoppelt und momentan ist das nicht so schön das ich früh's noch auf die Tassentaste drücken muß. Wasser erhitzen geht zum Glück noch. ;)
from senseowifi.
Hey @muchtkutte,
die Amtssprache auf GitHub ist english aber ich kann dir gern auf Deutsch antworten ;)
Tassenzähler: Toll! Habe ich selbst auch, allerdings auf der anderen Seite von MQTT, also in der Heimautomatisierung bzw in miener InfluxDB.
Mit dem Tassensensor hatte ich nie Probleme. Vielleicht ist deiner willkürlich Opfer eines Fehlers geworden. Ersetze ihn doch einfach mal. Per MQTT umgehen geht leider nicht. Das habe ich nie als Funktion vorgesehen. Solltest du dafür den Code entsprechend erweitern kannst du aber gern einen Pull Request beitragen!
Die Idee mit dem Deckelsensor finde ich SUPER! Wir haben es damals nicht übetreiben wollen und wollten den mechanischen Aufwand gering halten. Wenn du deine Lösung implementiert hast stell doch bitte Aufbau, Code und Fotos uä hier bereit. Vielleicht nehme ich das auch in unseren Aufbauten auf :)
Freue mich über eine ANtwort, um den Thread hier sauber zu halten aber bevorzugt als eingenes Ticket :) Danke!
Vergiss nicht oben die
from senseowifi.
I actually found about this project today, and I totally want to try that :)
I'm new to the electronic part of the project, so it's probably going to be quite a challenge. The end game for me would be to interface it with home assistant, probably through ESPHome. But I might play with your firmware instead, we'll see once I get here :)
I do have questions, though :) It would seem you have a 1.8 version of your pcb but the gerber export doesn't seem to exist for the 1.8. Am I missing something?
For the component parts, I found a PC817X3NSZ9F but it's not clear to me if it's equivalent to the PC817 you prescribe or if it's a totally different model.
Thanks for this project! :)
from senseowifi.
I stumbled across this amazing project and I wanted to automate my Senseo as well, even though I am not the coffee drinker in the house ;-)
Do you have a good source for the PCBs? If I try to order them online a quantity of 1 results in prices of 50€ which is a little bit much too handle. I was looking online to find a kit with all the parts but unfortunately without success.
I am also from Germany so any hint into the right direction is highly appreciated :-)
from senseowifi.
Hey @Hakzel, it becomes a lot cheaper if you e.g. order 10 via PCBway or similar. I should still have a few lying around (not the newest version but good enough to succeed). Send me an email and I can mail one to you.
from senseowifi.
@ThomDietrich thanks for the offer. I already sent you a mail but didn't get any response so far. Any other way to contact you? :-)
from senseowifi.
@Hakzel of course! Let me answer you now ;)
from senseowifi.
Related Issues (20)
- Compatibility question HOT 3
- Debug options HOT 2
- Implementing in Home Assistant HOT 23
- It's probably quite the challenge HOT 9
- error when compiling HOT 1
- Deprecate the `recipe` feature, anyone out there using it? HOT 2
- Cup Full Logic HOT 18
- OTA update HOT 6
- TCRT5000 disable HOT 1
- Entities not available in home assistant HOT 6
- List of hardware HOT 13
- New MQTT configuration format HOT 8
- Wiring help HOT 3
- Similar PCB for a smart coffee machine , any coffee machine HOT 1
- Second try :) HOT 18
- Replace TCRT5000? HOT 17
- Home Assistant integration instructions
- input_boolean for normal size coffee HOT 7
- Tracking the number of active projects
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from senseowifi.