Comments (10)
timschneeb
commented on June 23, 2024
It appears that the name of the Bluetooth profile for serial communication has changed. For the previous earbuds, it was something like GEARMANAGER, but the Buds2 use FACTORY as a name instead.
I've pushed an update that should fix this: 19f78ad
from budspro-headtracking.
githubcatw
commented on June 23, 2024
I don't get any data from the buds now, and weirdly enough the buds disconnect from my machine after a few minutes and don't reconnect until I restart them.
from budspro-headtracking.
githubcatw
commented on June 23, 2024
Output with -v and -t flags:
Galaxy Buds2 (****)
Searching for RFCOMM interface...
RFCOMM interface found. Establishing connection...
Connected to device.
<< OUTGOING: fd 04 00 7c 00 34 4d dd
<< OUTGOING: fd 03 00 c3 2f e9 dd
>> INCOMING: fd 27 08 61 08 03 5e 61 01 01 21 2a 01 00 bf 22 00 00 3a 01 3a 01 03 00 03 66 01 00 00 10 00 00 01 00 22 04 01 01 00 00 3f d5 dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
Exception in thread Thread-2:
Traceback (most recent call last):
File "C:\Users\User\AppData\Local\Programs\Python\Python38\lib\threading.py", line 932, in _bootstrap_inner
self.run()
File "C:\Users\User\AppData\Local\Programs\Python\Python38\lib\threading.py", line 870, in run
self._target(*self._args, **self._kwargs)
File "C:\Users\User\Downloads\BudsPro-Headtracking-master\BudsPro-Headtracking-master\RepeatedTimer.py", line 20, in _target
self.function(*self.args, **self.kwargs)
File "C:\Users\User\Downloads\BudsPro-Headtracking-master\BudsPro-Headtracking-master\SpatialSensorManager.py", line 44, in __keepAlive
self.service.sendPacket(self.MSG_SPATIAL_AUDIO_CONTROL, bytes(self.CID_KEEP_ALIVE))
File "C:\Users\User\Downloads\BudsPro-Headtracking-master\BudsPro-Headtracking-master\BluetoothService.py", line 85, in sendPacket
self.socket.send(bytes(b))
File "C:\Users\User\AppData\Local\Programs\Python\Python38\lib\site-packages\bluetooth\msbt.py", line 75, in send
return bt.send (self._sockfd, data)
OSError: An established connection was aborted by the software in your host machine.
from budspro-headtracking.
alesya-h
commented on June 23, 2024
On my computer after adding missing or match["name"] == "FACTORY" (there was only or match["name"] == b"FACTORY") it causes earbuds to stutter and restart with no spatial data being printed. Logs look like that:
Alesya's Buds2 Pro
Searching for RFCOMM interface...
FACTORY
RFCOMM interface found. Establishing connection...
Connected to device.
Exception in thread Thread-2 (_target):
Traceback (most recent call last):
File "<string>", line 3, in send
_bluetooth.error: (107, 'Transport endpoint is not connected')
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/nix/store/0n4y44dnaxafqs7cg625aldrb152x7bx-python3-3.10.10/lib/python3.10/threading.py", line 1016, in _bootstrap_inner
self.run()
File "/nix/store/0n4y44dnaxafqs7cg625aldrb152x7bx-python3-3.10.10/lib/python3.10/threading.py", line 953, in run
self._target(*self._args, **self._kwargs)
File "/home/me/p/fork/BudsPro-Headtracking/RepeatedTimer.py", line 20, in _target
self.function(*self.args, **self.kwargs)
File "/home/me/p/fork/BudsPro-Headtracking/SpatialSensorManager.py", line 44, in __keepAlive
self.service.sendPacket(self.MSG_SPATIAL_AUDIO_CONTROL, bytes(self.CID_KEEP_ALIVE))
File "/home/me/p/fork/BudsPro-Headtracking/BluetoothService.py", line 85, in sendPacket
self.socket.send(bytes(b))
File "<string>", line 5, in send
bluetooth.btcommon.BluetoothError: [Errno 107] Transport endpoint is not connected
Unlike @githubcatw I don't have the "Spatial Sensor" section anywhere in GalaxyBudsClient (tried 4.5.2 and master), although other features of it work fine (I'm on Linux)
from budspro-headtracking.
alesya-h
commented on June 23, 2024
Output with -v and -t (differs from @githubcatw 's - mine has 2 incoming messages with first one looking somewhat similar to theirs, and the second one being something new):
Alesya's Buds2 Pro
Searching for RFCOMM interface...
FACTORY
RFCOMM interface found. Establishing connection...
Connected to device.
<< OUTGOING: fd 04 00 7c 00 34 4d dd
<< OUTGOING: fd 03 00 c3 2f e9 dd
>> INCOMING: fd 2f 00 61 0b 04 63 63 01 00 11 00 01 00 bf 21 02 00 48 01 48 01 03 00 03 66 00 01 00 10 01 01 00 00 11 02 01 01 00 01 00 00 01 00 00 00 00 00 4d 63 dd
>> INCOMING: fd 0d 40 63 00 00 01 80 05 01 80 05 00 00 e7 a5 dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
<< OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
from budspro-headtracking.
githubcatw
commented on June 23, 2024
Unlike @githubcatw I don't have the "Spatial Sensor" section anywhere in GalaxyBudsClient (tried 4.5.2 and master), although other features of it work fine (I'm on Linux)
I enabled it from the translator settings, though I don't remember how.
from budspro-headtracking.
sylvainf
commented on June 23, 2024
Hello,
I have some buds pro 2 under the latest firmware (XXU0AWA5) and I encounter exactly the same problem. The device sends several frames "fd 07 00 c3 00 00 00 00 6a dd dd" and then disconnects after about 20 seconds.
from budspro-headtracking.
llkjhgllkjhg
commented on June 23, 2024
Output with
-vand-t(differs from @githubcatw 's - mine has 2 incoming messages with first one looking somewhat similar to theirs, and the second one being something new):Alesya's Buds2 Pro Searching for RFCOMM interface... FACTORY RFCOMM interface found. Establishing connection... Connected to device. << OUTGOING: fd 04 00 7c 00 34 4d dd << OUTGOING: fd 03 00 c3 2f e9 dd >> INCOMING: fd 2f 00 61 0b 04 63 63 01 00 11 00 01 00 bf 21 02 00 48 01 48 01 03 00 03 66 00 01 00 10 01 01 00 00 11 02 01 01 00 01 00 00 01 00 00 00 00 00 4d 63 dd >> INCOMING: fd 0d 40 63 00 00 01 80 05 01 80 05 00 00 e7 a5 dd << OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd << OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd << OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd << OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd << OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd << OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd << OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd << OUTGOING: fd 07 00 c3 00 00 00 00 6a dd dd
hello, could u plz teach me how to get R177XXU0AVC8 this firmware version if i don't know how to use python
from budspro-headtracking.
githubcatw
commented on June 23, 2024
hello, could u plz teach me how to get R177XXU0AVC8 this firmware version if i don't know how to use python
If you are on a recent firmware version you have 360 audio. If you're unsure, check if your firmware version (which can be found in Earbuds settings > About earbuds in the mobile app) is above AVC8 in this list.
from budspro-headtracking.
llkjhgllkjhg
commented on June 23, 2024
hello, could u plz teach me how to get R177XXU0AVC8 this firmware version if i don't know how to use python
If you are on a recent firmware version you have 360 audio. If you're unsure, check if your firmware version (which can be found in Earbuds settings > About earbuds in the mobile app) is above AVC8 in this list.
thx, i know it had have 360 audio, but i actually want to downgrade the firmware version T_T
from budspro-headtracking.
Related Issues (7)
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from budspro-headtracking.