Shelly EM support? about venus.dbus-shellyplug HOT 10 CLOSED

Looks like the Shelly EM is quite similar than a Shelly Plug.

Please test the branch shellyEM. The first channel of the Shelly EM should be displayed.

from venus.dbus-shellyplug.

I tried the Shelly EM branch home on my test setup and it seems to work fine.

I added my Shelly EM as a grid meter and it shows the output fine on L1.

I even tried to add an Shelly Plug S into the mix as an AC Load on L2 but im not sure how it is suppose to look in
remote console or vrm, but i can only see the total draw of them both on L1.
(the PlugS sits after the EM and it's load is included in the EM)

I took some screenshots and put them on https://ibb.co/album/dWHHqn

And a small log snippet on https://pastebin.com/U06xh294

from venus.dbus-shellyplug.

Noticed one thing, when i disconnect the EM & PlugS, the latest AC input value remains in VRM.
https://ibb.co/sy2HYYX
But i can see them both as "Not Connected" in the remote consol.
If i reboot the Venus OS Pi the values sets to zero in VRM (https://ibb.co/KhFxfsL)

from venus.dbus-shellyplug.

I connected the EM & PlugS again and they both showed up again automaticly.
When i disconnected them again the AC Input value became 0 in VRM (https://ibb.co/xCDNKS0)
Maybe it depends on how close the next VRM update is?
I have it set to 1 min, but maybe i had the VRM page up and the updates was in realtime?

from venus.dbus-shellyplug.

Looks like the Shelly EM is quite similar than a Shelly Plug.

Please test the branch shellyEM. The first channel of the Shelly EM should be displayed.

Hi, i tried it too but on my setting it dose´t work. What do i wrong?

from venus.dbus-shellyplug.

Do you use the first or the second channel of the Shelly EM?

from venus.dbus-shellyplug.

The first. :) i have found my mistake. Ich had the wrong skript. the plugs skript, not the ..../Telekatz/venus.dbus-shellyPlug/tree/shellyEM skript.

now i only copyed the new shelly.plug.py and it works.

@Telekatz can you update the installation guide on tree/shellyEM ? So that the files are downloaded from this path.

thx and good night

from venus.dbus-shellyplug.

I added a GUI setting to select the measurement channel of the EM. Can someone please test if this is working correctly?

from venus.dbus-shellyplug.

I added a GUI setting to select the measurement channel of the EM. Can someone please test if this is working correctly?

Hi Telekatz,
i tried you new Version and it works fine. I can change the messurment input in the gui of venus os.

I noticed that your installation path is the same as the plugS. Can you still change the directory/folder to "dbus-shellyem" So now i can not use both of your scripts

The installation script works too. Thx alot.

from venus.dbus-shellyplug.

I noticed that your installation path is the same as the plugS. Can you still change the directory/folder to "dbus-shellyem" So now i can not use both of your scripts

You only need one script. It works with all types of devices.

from venus.dbus-shellyplug.