Comments (5)
I also had this issue. The sollution is to tell windows to treat this device like a bossa USB serial device (Use the Bossa driver for TinyG2).
Here is how I fixed it:
Find the bossa.inf file on your system. Mine was in: c:\Program Files (x86)\Arduino\drivers
Make a copy of that file and call it tinyg2.inf Then I edited the tinyg2.info file. Unfortunately I don't have the computer that I was working on so I have to post the changes I made later. But I think I changes the VID (vendor ID) and PID (Product ID).
Then I right clicked on the TinyG2 device and told windows I wanted to update the driver. Then I browsed to the tinyg2.info file and windows installed the bossa driver. Then TinyG2 showed up as a com port.
I'm able to communicate with G2 over serial, but tgFX will not connect to it.
from g2.
http:// http://synthetos.github.io/TinyGv2.infsynthetos.github.iohttp://synthetos.github.io/TinyGv2.inf
/ http://synthetos.github.io/TinyGv2.infTinyGv2http://synthetos.github.io/TinyGv2.inf
.inf http://synthetos.github.io/TinyGv2.inf
Use this guys. TgFX does not work right now true. See if I can get it
working this weekend. U can send files with CoolTerm if u use CTS and the
send file option.
On Mar 27, 2014 11:00 PM, "boondog" [email protected] wrote:
I also had this issue. The sollution is to tell windows to treat this
device like a bossa USB serial device (Use the Bossa driver for TinyG2).Here is how I fixed it:
Find the bossa.inf file on your system. Mine was in: c:\Program Files
(x86)\Arduino\drivers
Make a copy of that file and call it tinyg2.inf Then I edited the
tinyg2.info file. Unfortunately I don't have the computer that I was
working on so I have to post the changes I made later. But I think I
changes the VID (vendor ID) and PID (Product ID).Then I right clicked on the TinyG2 device and told windows I wanted to
update the driver. Then I browsed to the tinyg2.info file and windows
installed the bossa driver. Then TinyG2 showed up as a com port.I'm able to communicate with G2 over serial, but tgFX will not connect to
it.Reply to this email directly or view it on GitHubhttps://github.com//issues/7#issuecomment-38884737
.
from g2.
Thank you guys for your help, i will test it right now.
from g2.
Sorry to reopen this thread, but I'm trying to get a Due/G2 setup configured on a Win8 x62 box that I was just forced to acquire this weekend (my old box died and don't have the time to breathe life back into it). I tried updating the driver for Tiny G v2 as it appears in Other Devices in Device Manager, but Win 8 complains that the driver file isn't digitally signed:
Is this just a Win8 configuration issue on my box?
Tnx,
D
from g2.
Yes. You need to put win 8 in test mode to use unsigned drivers.
On May 4, 2014 7:18 PM, "dfl33r" [email protected] wrote:
Sorry to reopen this thread, but I'm trying to get a Due/G2 setup
configured on a Win8 x62 box that I was just forced to acquire this weekend
(my old box died and don't have the time to breathe life back into it). I
tried updating the driver for Tiny G v2 as it appears in Other Devices in
Device Manager, but Win 8 complains that the driver file isn't digitally
signed:
[image: tinyg2 driver error]https://cloud.githubusercontent.com/assets/7483289/2874331/593b21cc-d3e2-11e3-99fc-0d103a71aadc.jpgIs this just a Win8 configuration issue on my box?
Tnx,
D—
Reply to this email directly or view it on GitHubhttps://github.com//issues/7#issuecomment-42150454
.
from g2.
Related Issues (20)
- Spiral roughing hiccup? HOT 4
- Not emitting steps at shallow incline. HOT 7
- Skew correction ideas? HOT 4
- G-codes HOT 1
- Error Compiling: Windows 10 Atmel Studio HOT 1
- Spindle sometimes does not enable HOT 3
- 9 axis external driver board HOT 1
- Soft Limits not setting alarm state. Not stopping job. HOT 1
- Is the g2core project still active? HOT 1
- feedrate interpretation for moves involving both, primary axes (XYZ) and secondary linear axes (UVW) differs from LinuxCNC
- Arduino Due with Edge-preview+gShield not working ///'laser_tool' was not declared in this scope/// HOT 4
- Status report not returning "pos" or "mpo" for A-axis HOT 1
- 101.03 branch HOT 3
- UART on g2core
- Spindle Enable Pin Not Functioning HOT 1
- Compile g2core for gShield on Windows HOT 3
- Endstops behaviour HOT 9
- Which version? HOT 15
- Is G2core a good choice for my app?
- Project status HOT 5
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from g2.