Plugin appears to come up and connect but temperature sensors read 0 about homebridge-synology HOT 7 CLOSED

I confirm to have the same issue (as reported by many others in the Issues section). Hope there will be a comment / solution soon available.

from homebridge-synology.

I confirm to have the same issue (as reported by many others in the Issues section). Hope there will be a comment / solution soon available.

Same problem here. Do you have it on https and local network? I think it may be not working because of self-signed certificate not being allowed.

from homebridge-synology.

Switched the plugin config such that "protocol": "http" and "port": 5000, but now I see a different error in the log:

[9/29/2022, 11:36:18 AM] [DiskStation] Device is not online; Polling temperature disabled.
[9/29/2022, 11:36:18 AM] [DiskStation] Device is not online; Polling disk temperature disabled.

The Synology is online since it is hosting the HomeBridge. If this was an authentication issue between the plugin and the Synology would I see a different error?

I tried setting "host" to either "127.0.0.1" (i.e., localhost) or the actual IP address of the Synology, but still see the "Device is not online" error.

from homebridge-synology.

Hi, Did you guys figure this out. I'm having the same problem. My Homebridge is hosted on a DS120j running 7.0.1. I have one other DS running 7.0.1 and one running 7.1. All three appear to be offline /off when they are not. I did try this plugin on a test Homebridge about 2 weeks ago and it seemed to be working fine so I suspect it is a Synology problem. Would love to get this working.

from homebridge-synology.

Workaround moved to its own issue: #86

from homebridge-synology.

The workaround cited in #86 to enable ping works, and I can now see temperatures. While I agree that requiring the end user to ssh into the DiskStation is not ideal, it does work.

I'll leave this issue open while I look at the code to see if one can eliminate the dependency on ping.

from homebridge-synology.

Well, that was embarrassing... ignore that password (which thankfully was the now-changed password for the non-admin account).

from homebridge-synology.