Comments (19)
This would make my experience with Snapmaker so much better.
from snapmaker2-controller.
Please add this, my printer and PC are not close, so it would be a huge quality of life improvement to be able to trust my computer once.
from snapmaker2-controller.
Just another vote for this feature. My printer is only in the next room and it still drives me crazy to have to make the trek back and forth multiple times.
You don't have to worry about making it 100% secure and fool-proof. Just make it opt-in, so we can make the choice. My WiFi is secure, so it's not like a neighbor can start a print job or anything...
from snapmaker2-controller.
I too really think needing the authorization limits my ability to print remotely.
from snapmaker2-controller.
This really needs to be a thing.
from snapmaker2-controller.
This is a huge problem, agreed.
I think there's an alternative idea though, what if instead of manually going down and hitting the button, you set up a password on the printer and have to input that in Luban to connect?
from snapmaker2-controller.
I would really like this to be a priority. Remote printing is tough. It also makes it tough to build automation tools since I can't get API tokens without manually clicking the authorize button.
from snapmaker2-controller.
Please fix this. After the snapmaker is turned off, then back on, a screen request is required. My printer is 3 rooms away and it is very frustrating to have to walk to it every day I want to print.
from snapmaker2-controller.
I'd like to see this one too. Octoprint on a Raspberry Pi is an okay workaround, but you'd loose features like resuming after power failure, for example. When the printer is in a trusted network, we should be able to set an option that bypasses the verification and just accepts connection from Luban right away. That option would be disabled by default, but anybody who willingly wants to lower the level of security should be able to do so.
from snapmaker2-controller.
@jenkins007 - my workaround due to this was to install octoprint on a raspberry pi, and use it instead of luban... don't believe it supports the laser or cnc modules though.
from snapmaker2-controller.
from snapmaker2-controller.
@ITmaze that is where this issue is...
from snapmaker2-controller.
from snapmaker2-controller.
I vote for this feature. Ideally have an API for for it, so it can be used even from other tools with plugins (Cura).
from snapmaker2-controller.
I vote for this feature. Ideally have an API for for it, so it can be used even from other tools with plugins (Cura).
There is already a Cura plugin for Snapmaker 2.0 from Snapmaker user, though its document is all in Chinese. It connects to SM 2.0 through Wi-Fi, and remember the authentication token, which allows you to verify only once.
from snapmaker2-controller.
There is already a Cura plugin for Snapmaker 2.0 from Snapmaker user, though its document is all in Chinese. It connects to SM 2.0 through Wi-Fi, and remember the authentication token, which allows you to verify only once.
Hold on a second. Recallable authentication tokens are already a feature. And Luban doesn't use it. What?
from snapmaker2-controller.
Checkout latest firmware log, the improved firmware was released last month. While Luban haven't release its update yet.
from snapmaker2-controller.
I vote for this feature. Ideally have an API for for it, so it can be used even from other tools with plugins (Cura).
There is already a Cura plugin for Snapmaker 2.0 from Snapmaker user, though its document is all in Chinese. It connects to SM 2.0 through Wi-Fi, and remember the authentication token, which allows you to verify only once.
I translated this text and awaiting cura maintainer to approve the PR.
from snapmaker2-controller.
@Johnny132 I believe your original issue has been resolved if you upgrade to latest firmware. Luban gets a token that remembers you if you try to connect to the machine again so you can connect without verification.
from snapmaker2-controller.
Related Issues (20)
- M600 Behavior with Dual Extruder HOT 1
- G1029 A does not allow dual extruder? HOT 2
- Single Extruder load/unload issue
- Dual extruder filament runout-no temp control of right nozzle
- After changing from Laser to 3DP calibration data lost
- Load limit on axis with 3DP and Laser (not CNC)
- Emergency stop button not powering off laser
- "Machine has lost its connection" window lacks dismiss button
- Snapmaker 2 doesn't understand GCodes about removable storage, such as M21 (initialize SD) HOT 1
- Second extruder printing a cm too high
- Firmware propose to stop running job when Luban disconnected from SM
- Air Assist Pump not working with 10W laser. HOT 1
- CNC zeroing : need for more smaller steps (at least 0.05mm)
- Turn off Door Detection from running job
- Feature Request: Enlarge every 20th degree temperature option in selector
- Add move to work origin button
- Stop raising Z to max after job
- 10W laser reduced intensity using inline mode
- Laser/CNC touch panel operation - Control of Z-axis movement HOT 1
- M600 Code has a delay
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from snapmaker2-controller.