Comments (16)
RBMDragon
commented on September 25, 2024
I have tried looking through all the documentation and comments in here, but I still have the GetDeviceInfo timeout issue.
I got it to initialize, which puzzles me.
Tried both 32-bit and 64-bit versions, boiled the code down as much as possible, ran as admin with and without Dragon Center open, no success. I also don't have any success with the MSIRGB code either.
Running on an MSI Z390 Gaming Pro Carbon AC, newest BIOS, Dragon Center and Mystic Light. Mystic Light 3 I believe.
from msi-mystic-light-tool.
SimoDax
commented on September 25, 2024
I don't know how to help you man, initially I made this repo as a boilerplate to show mystic light's capabilities but it soon turned into a demostration of bad the software engineering from MSI is. I suggest you look into MSIRGB which interfaces directly to the hardware instead of going through this hell of sdk
from msi-mystic-light-tool.
RBMDragon
commented on September 25, 2024
It really is too bad that their SDK is so badly documented. I like their hardware.
I've tried the MSIRGB, but without success. Do I have to uninstall Mystic Light in order to get it working, or even Dragon Center?
I could the interface open, but no connection to the lights.
from msi-mystic-light-tool.
SimoDax
commented on September 25, 2024
Yeah I think uninstalling them is worth a shot
from msi-mystic-light-tool.
erkr
commented on September 25, 2024
Hi, I never got the SDK working reliable! Have had a ticket exchange with MSI, no intelligence encountered there :-(
BUT, if you know what _GetDeviceInfo returns, you can skip the call. That works (but it remains unreliable)
If you try MSIRGB (I did), just uninstalling MysticLight in Dragon Center is enough.
from msi-mystic-light-tool.
RBMDragon
commented on September 25, 2024
Hey erkr.
I did not have any luck with MSIRGB after uninstalling MysticLight, but perhaps it is dependent on a reboot? Cannot remember if I did that.
I have had success before with JackNet RGB Sync, but the synchronization was still out of whack between the GPU and MB.
from msi-mystic-light-tool.
erkr
commented on September 25, 2024
Hi
I tried msirgb half a year ago. Had to patch the code to support my MB with some success (inverted colors).
I’m following this project. More promising, but less mature yet;
https://gitlab.com/CalcProgrammer1/OpenRGB
Have a nice day
…Sent from my mobile
On 6 Sep 2020, at 21:41, RBMDragon ***@***.***> wrote:
Hey erkr.
I did not have any luck with MSIRGB after uninstalling MysticLight, but perhaps it is dependent on a reboot? Cannot remember if I did that.
I have had success before with JackNet RGB Sync, but the synchronization was still out of whack between the GPU and MB.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
[ { ***@***.***": "http://schema.org", ***@***.***": "EmailMessage", "potentialAction": { ***@***.***": "ViewAction", "target": "#13 (comment)", "url": "#13 (comment)", "name": "View Issue" }, "description": "View this Issue on GitHub", "publisher": { ***@***.***": "Organization", "name": "GitHub", "url": "https://github.com" } } ]
from msi-mystic-light-tool.
RBMDragon
commented on September 25, 2024
Hi
Which part of the code did you patch?
Specifically which file?
Have a nice day too.
from msi-mystic-light-tool.
erkr
commented on September 25, 2024
I will check later
…Sent from my mobile
On 6 Sep 2020, at 23:41, RBMDragon ***@***.***> wrote:
Hi
Which part of the code did you patch?
Specifically which file?
Have a nice day too.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
[ { ***@***.***": "http://schema.org", ***@***.***": "EmailMessage", "potentialAction": { ***@***.***": "ViewAction", "target": "#13 (comment)", "url": "#13 (comment)", "name": "View Issue" }, "description": "View this Issue on GitHub", "publisher": { ***@***.***": "Organization", "name": "GitHub", "url": "https://github.com" } } ]
from msi-mystic-light-tool.
erkr
commented on September 25, 2024
Project: https://github.com/ixjf/MSIRGB
File: MSIRGB/MSIRGB.DLL/logic/Lighting.cpp
Method: Lighting::MbCompatError Lighting::check_supported_mb()
There I added the code for my MB. Nowadays, you can even specify inversion :-)
from msi-mystic-light-tool.
RBMDragon
commented on September 25, 2024
Hi
Unfortunately, it didn't seem to solve the problem.
Thank you for the help though.
from msi-mystic-light-tool.
erkr
commented on September 25, 2024
Hi
I also noticed the MSIRGB version I used ( February) was not always able to properly initialize the io chip. So I had to configure default mode in mystic light before uninstall mystic light.
I hope this is of any help
…Sent from my mobile
On 7 Sep 2020, at 21:47, RBMDragon ***@***.***> wrote:
Hi
Unfortunately, it didn't seem to solve the problem.
Thank you for the help though.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or unsubscribe.
[ { ***@***.***": "http://schema.org", ***@***.***": "EmailMessage", "potentialAction": { ***@***.***": "ViewAction", "target": "#13 (comment)", "url": "#13 (comment)", "name": "View Issue" }, "description": "View this Issue on GitHub", "publisher": { ***@***.***": "Organization", "name": "GitHub", "url": "https://github.com" } } ]
from msi-mystic-light-tool.
RBMDragon
commented on September 25, 2024
Hi
I've gotten some feedback from MSI and have so far been successful in getting feedback from getDevInfo (MLAPI_GetDeviceInfo).
They have uploaded a new version of the SDK (DLL files have been updated).
from msi-mystic-light-tool.
SimoDax
commented on September 25, 2024
Nice of them, if you make a pr with the correct DLL I'll merge it
from msi-mystic-light-tool.
RBMDragon
commented on September 25, 2024
Can feel I'm still a bit new to GitHub.
How do I make a pull request and merge the new files in?
from msi-mystic-light-tool.
erkr
commented on September 25, 2024
I merged the new SDK into my private project as well. getDevInfo seems to work, but lets see (it worked intermittently in the past)
Another issue is definitely not solved. Every time I update LED color settings, the LEDS briefly switch off.
from msi-mystic-light-tool.
Related Issues (12)
- GetDeviceInfo dump HOT 9
- GetDeviceName returns an empty array
- How does it works? HOT 1
- For 64 bit, another dll needed
- Linux? HOT 2
- Need help getting it to work HOT 28
- Mysticlight 1 doesnt work HOT 2
- Feel free to use my wrapper for Mystic Light API HOT 4
- LEDs temporarily turn off when changing colours HOT 5
- Mystic light SDK compatible with Mystic Light 3.0 ? (Timeout getDeviceInfo) HOT 9
- The LEDs revert to all white each time I restart or resume the computer from sleep HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from msi-mystic-light-tool.