Unable to build homepoint on MacOS about homepoint HOT 27 CLOSED

Hey,
looks like you don't have cmake installed.

The easiest way to go about this on MacOS is to install Homebrew and then run brew install cmake.

Let me know if that works for you :)

from homepoint.

Thanks for your fast respons, instelling cake did the trick, But now I run into a new compiling error:

-- Compiling for M5Stack CMake Error at main/CMakeLists.txt:118 (spiffs_create_partition_image): Unknown CMake command "spiffs_create_partition_image".

And complice output logfile shows:

`Compiling the C compiler identification source file "CMakeCCompilerId.c" failed.
Compiler: /Users/remco/esp/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc
Build flags:
Id flags:

The output was:
1
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find crt1-sim.o: No such file or directory
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find _vectors.o: No such file or directory
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find -lsim
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find -lhandlers-sim
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find -lhal
collect2: error: ld returned 1 exit status

Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" failed.
Compiler: /Users/remco/esp/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++
Build flags:
Id flags:

The output was:
1
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find crt1-sim.o: No such file or directory
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find _vectors.o: No such file or directory
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find -lsim
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find -lhandlers-sim
/Users/remco/esp/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: cannot find -lhal
collect2: error: ld returned 1 exit status`

I have cmake version 3.14.5 installed.

Gr. Remco

from homepoint.

Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" failed. points towards something gone wrong in your PATHs.

Here are mine as a reference (from zsh.rc):

export IDF_PATH="~/Documents/Development/esp-idf"
export PATH=$PATH:~/Documents/Development/xtensa-esp32-elf/bin

I assume you followed the instructions of running

cd build
cmake -DM5STACK=ON ../

?

from homepoint.

Yep,

My .bash_profile contains:

export PATH=~/esp/xtensa-esp32-elf/bin:$PATH
export IDF_PATH=~/esp/esp-idf
export PATH="$IDF_PATH/tools:$PATH"

And I did

cd ~/home/esp/homepoint/build
cmake -DM5STACK=ON ../

Gr. Remco

from homepoint.

Does this error appear when you run make or cmake ?

If so, can you do rm -rf * in build, do a fresh cmake configuration and paste me the output?

from homepoint.

It appears when I run cmake.

When I do:

MacbookPro:bin remco$ which ld
I get:

/usr/bin/ld

So there is another build environment. Might that be a Problem?

from homepoint.

Yeah, could be. I'd put the $PATH variable before the IDF Path in your bash.rc, because OSX will use the first ld it can find.

Edit: I'm getting the same output on my machine.

from homepoint.

Putting $PATh in first makes no different....

from homepoint.

Which ESP-IDF version are you using?

from homepoint.

3.2

from homepoint.

Ahhh, I see. I just tried that and had the same error as yours.
The issue is that HomePoint relies on CMake which is pretty new with ESP-IDF. I recommend you checkout the master of esp-idf through github and use that.
That definitely works on my end (although they recently introduced a new warning about using an old GCC version). That situation is not ideal, but thanks for pointing it out.

Let me know if that works on your end?

from homepoint.

Thanks,

Now its working with the master branch of esp-idd. Only the last step:

make -j 8 flash

Gives a lot of errors, but that is probably because it tries to flash the image to the M5stack ? It is not connected and I havent defined a serial port anywhere. Should I run menuconfig for that?

Gr. Remco

from homepoint.

Try building without flash at the end

from homepoint.

Hmm,

Still no sucess,

make -j 8 flash
and
make -j 8

Both give a lot (thousands) of these waring below. And 2 errors:

/Users/remco/esp/esp-idf/components/wpa_supplicant/src/crypto/sha1.c:135:(.text.sha1_prf+0xa): dangerous relocation: call8: call target out of range: strlen
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/crypto/sha1.c:158:(.text.sha1_prf+0x73): dangerous relocation: call8: call target out of range: memcpy
esp-idf/wpa_supplicant/libwpa_supplicant.a(fast_aes-unwrap.c.obj): In function `fast_aes_unwrap':
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-unwrap.c:37:(.text.fast_aes_unwrap+0xa): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-unwrap.c:39:(.text.fast_aes_unwrap+0x16): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-unwrap.c:58:(.text.fast_aes_unwrap+0x61): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-unwrap.c:60:(.text.fast_aes_unwrap+0x76): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-unwrap.c:65:(.text.fast_aes_unwrap+0x93): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-unwrap.c:66:(.text.fast_aes_unwrap+0x9e): dangerous relocation: call8: call target out of range: memcpy
esp-idf/wpa_supplicant/libwpa_supplicant.a(fast_aes-wrap.c.obj): In function `fast_aes_wrap':
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-wrap.c:42:(.text.fast_aes_wrap+0xa): dangerous relocation: call8: call target out of range: memset
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-wrap.c:43:(.text.fast_aes_wrap+0x16): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-wrap.c:62:(.text.fast_aes_wrap+0x42): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-wrap.c:63:(.text.fast_aes_wrap+0x4d): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-wrap.c:68:(.text.fast_aes_wrap+0x65): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_aes-wrap.c:70:(.text.fast_aes_wrap+0x7b): dangerous relocation: call8: call target out of range: memcpy
esp-idf/wpa_supplicant/libwpa_supplicant.a(fast_sha256-internal.c.obj): In function `fast_sha256_vector':
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_sha256-internal.c:36:(.text.fast_sha256_vector+0xd): dangerous relocation: call8: call target out of range: mbedtls_sha256_starts_ret
esp-idf/wpa_supplicant/libwpa_supplicant.a(fast_sha256.c.obj): In function `fast_hmac_sha256_vector':
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_sha256.c:112:(.text.fast_hmac_sha256_vector+0x3a): dangerous relocation: call8: call target out of range: memset
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_sha256.c:112:(.text.fast_hmac_sha256_vector+0x45): dangerous relocation: call8: call target out of range: memcpy
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_sha256.c:112:(.text.fast_hmac_sha256_vector+0xa2): dangerous relocation: call8: call target out of range: memset
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_sha256.c:112:(.text.fast_hmac_sha256_vector+0xad): dangerous relocation: call8: call target out of range: memcpy
esp-idf/wpa_supplicant/libwpa_supplicant.a(fast_sha256.c.obj): In function `fast_sha256_prf':
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_sha256.c:143:(.text.fast_sha256_prf+0x11): dangerous relocation: call8: call target out of range: strlen
/Users/remco/esp/esp-idf/components/wpa_supplicant/src/fast_crypto/fast_sha256.c:160:(.text.fast_sha256_prf+0x85): dangerous relocation: call8: call target out of range: memcpy
esp-idf/mbedtls/mbedtls/library/libmbedtls.a(esp_hardware.c.obj): In function `mbedtls_hardware_poll':
/Users/remco/esp/esp-idf/components/mbedtls/port/esp_hardware.c:21:(.text.mbedtls_hardware_poll+0x7): dangerous relocation: call8: call target out of range: esp_fill_random
collect2: error: ld returned 1 exit status
make[2]: *** [homepoint.elf] Error 1
make[1]: *** [CMakeFiles/homepoint.elf.dir/all] Error 2
make: *** [all] Error 2

from homepoint.

What toolchain version are you using?

from homepoint.

1.22.0-80-g6c4433a-5.2.0 is the version on CI and my computers

from homepoint.

How can I check?

According to the online Manual I downloaded:

https://dl.espressif.com/dl/xtensa-esp32-elf-gcc8_2_0-esp32-2019r1-macos.tar.gz

edit:

I Think I found it:

xtensa-esp32-elf-cc (crosstool-NG crosstool-ng-1.22.0-80-g6c4433a) 5.2.0

So thats the Same as you use.

from homepoint.

Correct, the 8.2.0 is still in the unstable manual and did not work last time I checked, the correct one is specified here:
https://docs.espressif.com/projects/esp-idf/en/stable/get-started/macos-setup.html

from homepoint.

Did a new Install of the toolchain version 5.2.0 but Problem remains.....

from homepoint.

I still believe there is something off in the toolchain, cause none of the errors mentions Homepoint specifically, but they appear while compiling the ESP-IDF SDK.

from homepoint.

Running xtensa-esp32-elf-gcc -v on command line will tell you which version is in use

from homepoint.

gcc version 5.2.0 (crosstool-NG crosstool-ng-1.22.0-80-g6c4433a)

from homepoint.

I assume you deleted the build directory and reconfigured?

from homepoint.

What do you mean by reconfigured?

from homepoint.

Running cmake again

from homepoint.

Yeah,
After cleaning and rebuilding it works:

[100%] Built target __idf_build_target
[100%] Built target homepoint.elf
[100%] Built target gen_project_binary
[100%] Built target app
Scanning dependencies of target flash
Note: esptool.py will search for a serial port. To specify a port, set the ESPPORT environment variable.
Note: Using default baud rate 460800. To modify, set ESPBAUD environment variable.
esptool.py --chip esp32 -b 460800 write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x8000 partition_table/partition-table.bin 0x10000 homepoint.bin 0x1000 bootloader/bootloader.bin 0x310000 spiffs.bin
esptool.py v2.7-dev
Found 3 serial ports
Serial port /dev/cu.SOC

Sorry for all your effort, my mistake, I lack Some real software engineering skills ;-)

Maybe you can add the part of the masterbranch of esp-idf and the correct version off the toolchain to your README.md

from homepoint.

Awesome! Glad you got it working 👏

And yeah, I already had that in mind while we were discussing this :D

from homepoint.