Can't compile about espblinds HOT 6 OPEN

My friend Eric is a programmer and he did not have time to solve the issues but he pointed out that the definitions shown here and others are not set up in the code. I am not a programmer so this is the best explanation I can give you // Locals int currentStep = 0; int currentMode = MODE_OPEN; int stepDirection = EASYDRIVER_DIRECTION_FORWARDS; bool stepperEnabled = true; bool isOpening = false; bool isClosing = false; void setupWifi(void); void mqttCallback(char* topic, byte* payload, unsigned int length) ; [CECG_trans_Logo]THANX Mitch Geier President Computer Emergency & Consulting Group, LLC. ***@***.******@***.***> 609-758-1111 Ext 1 Privileged-Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. CECG LLC. and Mitch Geier are not liable for any loss or damage arising in any way from this message or its attachments. P Please consider the environment before printing this email. From: Jacob Morris ***@***.***> Sent: Friday, March 18, 2022 10:31 PM To: se1exin/ESPBlinds ***@***.***> Cc: Mitch Geier ***@***.***>; Author ***@***.***> Subject: Re: [se1exin/ESPBlinds] Can't compile (Issue #1) That's really odd that are you are still getting errors. Can you please try moving the setup() and loop() functions to the end of the file? Also just noticed you mention you are using Arduino IDE 1.9 which appears to be a beta version. I am successfully compiling this using Arduino IDE 1.8.19 (on linux) - can you try using version 1.8.19? — Reply to this email directly, view it on GitHub<#1 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABWMISROK2O5WRXA5XHGVPDVAU35VANCNFSM5RCJKCGA>. Triage notifications on the go with GitHub Mobile for iOS<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>

Ok I have done the decorations my buddy told me to do to the code I have from github. It solved most of the errrors. However, he states the code I have could never work. So I might have a bad set of files from github. Or github was not updated with the latest… here is why I am getting this error B:\Blinds\ESPBlinds\ESPBlinds.ino: In function 'void setup()': ESPBlinds:81:47: error: invalid conversion from 'const char*' to 'int' [-fpermissive] 81 | mqttPublish(MQTT_TOPIC_STATE, "closed"); You are defining void mqttPublish(char *topic, int payload) { // Serial.print(topic); // Serial.print(": "); // Serial.println(payload); But the payload is not an int As shown here mqttPublish(MQTT_TOPIC_DIRECTION, "reverse"); so Please if you have a version that compiles please let me know where I can get it [CECG_trans_Logo]THANX Mitch Geier President Computer Emergency & Consulting Group, LLC. ***@***.******@***.***> 609-758-1111 Ext 1 Privileged-Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. CECG LLC. and Mitch Geier are not liable for any loss or damage arising in any way from this message or its attachments. P Please consider the environment before printing this email. From: Jacob Morris ***@***.***> Sent: Friday, March 18, 2022 10:31 PM To: se1exin/ESPBlinds ***@***.***> Cc: Mitch Geier ***@***.***>; Author ***@***.***> Subject: Re: [se1exin/ESPBlinds] Can't compile (Issue #1) That's really odd that are you are still getting errors. Can you please try moving the setup() and loop() functions to the end of the file? Also just noticed you mention you are using Arduino IDE 1.9 which appears to be a beta version. I am successfully compiling this using Arduino IDE 1.8.19 (on linux) - can you try using version 1.8.19? — Reply to this email directly, view it on GitHub<#1 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABWMISROK2O5WRXA5XHGVPDVAU35VANCNFSM5RCJKCGA>. Triage notifications on the go with GitHub Mobile for iOS<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>

After further examination you have 2 functions with the same name mqqtPublish that are slightly different. Since I am not a coder I have made changes that might work . At least with these changes it compiles. Here is the entire file in text. Let me know what I might be missing per my last email…And thanks for the help and project =========================== #include <ESP8266WiFi.h> #include <EEPROM.h> #include <PubSubClient.h> #include "constants.h" #include "EasyDriver.h" // Outputs const int PIN_STEP = 4; const int PIN_DIR = 5; const int PIN_MS1 = -1; const int PIN_MS2 = -1; const int PIN_ENABLE = 14; const int PIN_FAN = 13; // Inputs //const int PIN_CUTOFF_CLOSE = 0; //const int PIN_CUTOFF_OPEN = 3; EasyDriver stepper = EasyDriver(PIN_STEP, PIN_DIR, PIN_MS1, PIN_MS2, PIN_ENABLE); WiFiClient espClient; PubSubClient mqttClient(espClient); // Down = forwards == close // Up = Reverse == open const int DIRECTION_CLOSE = EASYDRIVER_DIRECTION_FORWARDS; const int DIRECTION_OPEN = EASYDRIVER_DIRECTION_REVERSE; const bool MQTT_SEND_STEPS = false; // Vars that are updatable via MQTT and saved into EEPROM... // If this number is not found in EEPROM, then we assume no EEPROM values exist/have been saved // and all other EEPROM values should be discarded/fallback to default values. // See loadFromEeprom() int EEPROM_MAGIC_NUMBER = 10001; int STEPS_VERTICAL = 15000; // Number of full steps required to complete open/close sequence int DELAY_CLOSE = 500; // In micros int MODE_CLOSE = EASYDRIVER_MODE_FULL_STEP; int DELAY_OPEN = 500; // In micros int MODE_OPEN = EASYDRIVER_MODE_FULL_STEP; // Locals int currentStep = 0; int currentMode = MODE_OPEN; int stepDirection = EASYDRIVER_DIRECTION_FORWARDS; bool stepperEnabled = true; bool isOpening = false; bool isClosing = false; void setupWifi(void); void mqttCallback(char* topic, byte* payload, unsigned int length) ; void mqttReconnect(void); void loadFromEeprom(void); void setStepperDirection(int direction); void setStepperMode(int mode); void stepFor(int steps); void setStepperEnabled(bool enabled); void saveToEeprom(); void mqttPublish1(char *topic, int payload); void mqttPublish(char *topic, String payload); void setup() { // Cut off switches (not used in hardware, but implemented in case required in future) // pinMode(PIN_CUTOFF_CLOSE, INPUT_PULLUP); // pinMode(PIN_CUTOFF_OPEN, INPUT_PULLUP); pinMode(PIN_FAN, OUTPUT); stepper.reset(); Serial.begin(115200); while (! Serial); setupWifi(); mqttClient.setServer(MQTT_SERVER, 1883); mqttClient.setCallback(mqttCallback); if (!mqttClient.connected()) { mqttReconnect(); } mqttPublish1(MQTT_TOPIC_ENABLED, 0); mqttPublish(MQTT_TOPIC_STATE, "closed"); mqttPublish1(MQTT_TOPIC_STEPS, currentStep); loadFromEeprom(); // Topic for controlling the stepper remotely mqttClient.subscribe(MQTT_TOPIC_CONTROL_ENABLED); mqttClient.subscribe(MQTT_TOPIC_CONTROL_DIRECTION); mqttClient.subscribe(MQTT_TOPIC_CONTROL_STEPFOR); mqttClient.subscribe(MQTT_TOPIC_CONTROL_BLINDS); // Topics for updating EEPROM values remotely mqttClient.subscribe(MQTT_TOPIC_CONTROL_MODE_OPEN); mqttClient.subscribe(MQTT_TOPIC_CONTROL_MODE_CLOSE); mqttClient.subscribe(MQTT_TOPIC_CONTROL_DELAY_OPEN); mqttClient.subscribe(MQTT_TOPIC_CONTROL_DELAY_CLOSE); mqttClient.subscribe(MQTT_TOPIC_CONTROL_STEPS_VERTICAL); } /** * MAIN LOOP */ void loop() { if (!mqttClient.connected()) { mqttReconnect(); } mqttClient.loop(); } void closeBlinds() { isClosing = true; mqttPublish(MQTT_TOPIC_STATE, "closing"); setStepperDirection(DIRECTION_CLOSE); setStepperMode(MODE_CLOSE); stepFor(STEPS_VERTICAL); mqttPublish(MQTT_TOPIC_STATE, "closed"); isClosing = false; } void openBlinds() { isOpening = true; mqttPublish(MQTT_TOPIC_STATE, "opening"); setStepperDirection(DIRECTION_OPEN); setStepperMode(MODE_OPEN); stepFor(STEPS_VERTICAL); mqttPublish(MQTT_TOPIC_STATE, "opened"); isOpening = false; } /** * STEPPER WRAPPERS */ void stepFor(int steps) { setStepperEnabled(true); for (int i = 0; i < steps; i++) { // Serial.print("STEP"); // Serial.println(i); // Stepping mode is effectively a multiplier on the desired number of steps // E.g. a quarter step mode, to achieve a full step we need to do 4x stepper steps for (int x = 0; x < currentMode; x++) { stepper.step(); } currentStep += stepDirection; // if (stepDirection == DIRECTION_CLOSE && digitalRead(PIN_CUTOFF_CLOSE) == LOW) { // Serial.println("ABORT CLOSE"); // break; // } // if (stepDirection == DIRECTION_OPEN && digitalRead(PIN_CUTOFF_OPEN) == LOW) { // Serial.println("ABORT OPEN"); // break; // } if (!stepperEnabled) { break; } if (MQTT_SEND_STEPS) { if (currentStep % 250 == 0) { mqttPublish1(MQTT_TOPIC_STEPS, currentStep); } } mqttClient.loop(); } setStepperEnabled(false); } void setStepperMode(int mode) { stepper.setMode(mode); currentMode = mode; mqttPublish1(MQTT_TOPIC_MODE, mode); } void setStepperEnabled(bool enabled) { stepper.enable(enabled); if (enabled) { digitalWrite(PIN_FAN, HIGH); mqttPublish1(MQTT_TOPIC_ENABLED, 1); } else { digitalWrite(PIN_FAN, LOW); mqttPublish1(MQTT_TOPIC_ENABLED, 0); } stepperEnabled = enabled; } void setStepperDirection(int direction) { stepper.setDirection(direction); stepDirection = direction; if (direction == EASYDRIVER_DIRECTION_FORWARDS) { stepper.setDelay(DELAY_CLOSE); mqttPublish(MQTT_TOPIC_DIRECTION, "forwards"); } else { stepper.setDelay(DELAY_OPEN); mqttPublish(MQTT_TOPIC_DIRECTION, "reverse"); } } /** * WIFI / MQTT HELPERS */ void setupWifi() { Serial.print("Connecting to "); Serial.println(WIFI_SSID); WiFi.begin(WIFI_SSID, WIFI_PASSWORD); while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(); Serial.println("WiFi connected"); Serial.print("IP address: "); Serial.println(WiFi.localIP()); } void mqttCallback(char* topic, byte* payload, unsigned int length) { String topicStr = topic; String value = ""; for (int i = 0; i < length; i++) { value += (char)payload[i]; } Serial.println("mqttCallback !"); Serial.println(topicStr); Serial.println(value); if (topicStr == MQTT_TOPIC_CONTROL_ENABLED) { if (value.equals("1")) { setStepperEnabled(true); } else if (value.equals("0")) { setStepperEnabled(false); } } if (topicStr == MQTT_TOPIC_CONTROL_DIRECTION) { if (value.equals("1")) { setStepperDirection(DIRECTION_CLOSE); } else if (value.equals("0")) { setStepperDirection(DIRECTION_OPEN); } } if (topicStr == MQTT_TOPIC_CONTROL_STEPFOR) { int steps = value.toInt(); stepFor(steps); } if (topicStr == MQTT_TOPIC_CONTROL_BLINDS) { if (value.equals("opened") && !isOpening) { // if (value.equals("opened")) { openBlinds(); } else if (value.equals("closed") && !isClosing) { // } else if (value.equals("closed")) { closeBlinds(); } } if (topicStr == MQTT_TOPIC_CONTROL_MODE_OPEN) { MODE_OPEN = value.toInt(); saveToEeprom(); } if (topicStr == MQTT_TOPIC_CONTROL_MODE_CLOSE) { MODE_CLOSE = value.toInt(); saveToEeprom(); } if (topicStr == MQTT_TOPIC_CONTROL_DELAY_OPEN) { DELAY_OPEN = value.toInt(); saveToEeprom(); } if (topicStr == MQTT_TOPIC_CONTROL_DELAY_CLOSE) { DELAY_CLOSE = value.toInt(); saveToEeprom(); } if (topicStr == MQTT_TOPIC_CONTROL_STEPS_VERTICAL) { STEPS_VERTICAL = value.toInt(); saveToEeprom(); } } void mqttReconnect() { while (!mqttClient.connected()) { Serial.print("Attempting MQTT connection..."); // Attempt to connect if (mqttClient.connect(MQTT_CLIENT_ID, MQTT_USER, MQTT_PASSWORD, MQTT_TOPIC_STATUS, 1, true, "disconnected", false)) { Serial.println("connected"); // Once connected, publish an announcement... mqttClient.publish(MQTT_TOPIC_STATUS, "connected", true); } else { Serial.print("failed, rc="); Serial.print(mqttClient.state()); Serial.println(" try again in 5 seconds"); delay(5000); } } } void mqttPublish1(char *topic, int payload) { // Serial.print(topic); // Serial.print(": "); // Serial.println(payload); mqttClient.publish(topic, String(payload).c_str(), true); } void mqttPublish(char *topic, String payload) { // Serial.print(topic); // Serial.print(": "); // Serial.println(payload); mqttClient.publish(topic, payload.c_str(), true); } /** * EEPROM HELPERS */ void loadFromEeprom() { EEPROM.begin(24); //Read data from eeprom int magicNumber; int modeOpen; int modeClose; int delayOpen; int delayClose; int stepsVertical; EEPROM.get(0, modeOpen); EEPROM.get(4, modeClose); EEPROM.get(8, delayOpen); EEPROM.get(12, delayClose); EEPROM.get(16, stepsVertical); EEPROM.get(20, magicNumber); EEPROM.end(); if (magicNumber == EEPROM_MAGIC_NUMBER) { Serial.print("Successfully loaded config from eeprom"); MODE_OPEN = modeOpen; MODE_CLOSE = modeClose; DELAY_OPEN = delayOpen; DELAY_CLOSE = delayClose; STEPS_VERTICAL = stepsVertical; } else { Serial.print("EEPROM MAGIC NUMBER INCORRECT: "); Serial.print(magicNumber); Serial.print(" != "); Serial.println(EEPROM_MAGIC_NUMBER); Serial.print("Keeping default step config!"); } mqttPublish1(MQTT_TOPIC_MODE_OPEN, MODE_OPEN); mqttPublish1(MQTT_TOPIC_MODE_CLOSE, MODE_CLOSE); mqttPublish1(MQTT_TOPIC_DELAY_OPEN, DELAY_OPEN); mqttPublish1(MQTT_TOPIC_DELAY_CLOSE, DELAY_CLOSE); mqttPublish1(MQTT_TOPIC_STEPS_VERTICAL, STEPS_VERTICAL); } void saveToEeprom() { EEPROM.begin(24); EEPROM.put(0, MODE_OPEN); EEPROM.put(4, MODE_CLOSE); EEPROM.put(8, DELAY_OPEN); EEPROM.put(12, DELAY_CLOSE); EEPROM.put(16, STEPS_VERTICAL); EEPROM.put(20, EEPROM_MAGIC_NUMBER); EEPROM.commit(); EEPROM.end(); mqttPublish1(MQTT_TOPIC_MODE_OPEN, MODE_OPEN); mqttPublish1(MQTT_TOPIC_MODE_CLOSE, MODE_CLOSE); mqttPublish1(MQTT_TOPIC_DELAY_OPEN, DELAY_OPEN); mqttPublish1(MQTT_TOPIC_DELAY_CLOSE, DELAY_CLOSE); mqttPublish1(MQTT_TOPIC_STEPS_VERTICAL, STEPS_VERTICAL); } [CECG_trans_Logo]THANX Mitch Geier President Computer Emergency & Consulting Group, LLC. ***@***.******@***.***> 609-758-1111 Ext 1 Privileged-Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. The sender believes that this E-mail and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. CECG LLC. and Mitch Geier are not liable for any loss or damage arising in any way from this message or its attachments. P Please consider the environment before printing this email. From: Jacob Morris ***@***.***> Sent: Friday, March 18, 2022 10:31 PM To: se1exin/ESPBlinds ***@***.***> Cc: Mitch Geier ***@***.***>; Author ***@***.***> Subject: Re: [se1exin/ESPBlinds] Can't compile (Issue #1) That's really odd that are you are still getting errors. Can you please try moving the setup() and loop() functions to the end of the file? Also just noticed you mention you are using Arduino IDE 1.9 which appears to be a beta version. I am successfully compiling this using Arduino IDE 1.8.19 (on linux) - can you try using version 1.8.19? — Reply to this email directly, view it on GitHub<#1 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ABWMISROK2O5WRXA5XHGVPDVAU35VANCNFSM5RCJKCGA>. Triage notifications on the go with GitHub Mobile for iOS<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.******@***.***>>