ampy can't open Windows COM port numbers above 10 about ampy HOT 6 OPEN

Ah thanks for digging into it further, yeah that's annoying that Windows seems to treat COM ports above 9 so differently with path names. I just added a similar workaround function to the latest 1.0 version of ampy, and it should be up on PyPi in ~10 minutes too. I haven't fully tested it yet since I don't have a COM10 device handy, can you install the latest ampy and see if it repros? You can force an update with:

pip install adafruit-ampy --upgrade

Thanks again and apologies it took a while to look at this issue!

from ampy.

Hi tdicola,

I am still having the same trouble with ampy. I have version 1.07. Can you help.

1. Install ampy
   C:\Users\mikel>pip install adafruit-ampy
   Collecting adafruit-ampy
   Downloading https://files.pythonhosted.org/packages/59/99/f8635577c9a11962ec43714b3fc3d4583070e8f292789b4683979c4abfec/adafruit_ampy-1.0.7-py2.py3-none-any.whl
   Requirement already satisfied: pyserial in c:\users\mikel\anaconda3\lib\site-packages (from adafruit-ampy) (3.4)
   Requirement already satisfied: click in c:\users\mikel\anaconda3\lib\site-packages (from adafruit-ampy) (6.7)
   Collecting python-dotenv (from adafruit-ampy)
   Downloading https://files.pythonhosted.org/packages/8c/14/501508b016e7b1ad0eb91bba581e66ad9bfc7c66fcacbb580eaf9bc38458/python_dotenv-0.10.1-py2.py3-none-any.whl
   distributed 1.21.8 requires msgpack, which is not installed.
   Installing collected packages: python-dotenv, adafruit-ampy
   Successfully installed adafruit-ampy-1.0.7 python-dotenv-0.10.1
   You are using pip version 10.0.1, however version 19.0.3 is available.
   You should consider upgrading via the 'python -m pip install --upgrade pip' command.

2. Do the upgrade
   C:\Users\mikel>pip install adafruit-ampy --upgrade
   Requirement already up-to-date: adafruit-ampy in c:\users\mikel\anaconda3\lib\site-packages (1.0.7)
   Requirement not upgraded as not directly required: python-dotenv in c:\users\mikel\anaconda3\lib\site-packages (from adafruit-ampy) (0.10.1)
   Requirement not upgraded as not directly required: click in c:\users\mikel\anaconda3\lib\site-packages (from adafruit-ampy) (6.7)
   Requirement not upgraded as not directly required: pyserial in c:\users\mikel\anaconda3\lib\site-packages (from adafruit-ampy) (3.4)
   You are using pip version 10.0.1, however version 19.0.3 is available.
   You should consider upgrading via the 'python -m pip install --upgrade pip' command.

3. run it

C:\Users\mikel>ampy --port COM16 put main.py
Traceback (most recent call last):
File "c:\users\mikel\anaconda3\lib\runpy.py", line 193, in _run_module_as_main
"main", mod_spec)
File "c:\users\mikel\anaconda3\lib\runpy.py", line 85, in run_code
exec(code, run_globals)
File "C:\Users\mikel\Anaconda3\Scripts\ampy.exe_main.py", line 9, in
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 722, in call
return self.main(*args, **kwargs)
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 697, in main
rv = self.invoke(ctx)
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 1063, in invoke
Command.invoke(self, ctx)
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 895, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 535, in invoke
return callback(*args, **kwargs)
File "c:\users\mikel\anaconda3\lib\site-packages\ampy\cli.py", line 99, in cli
_board = pyboard.Pyboard(port, baudrate=baud, rawdelay=delay)
File "c:\users\mikel\anaconda3\lib\site-packages\ampy\pyboard.py", line 147, in init
raise PyboardError('failed to access ' + device)
ampy.pyboard.PyboardError: failed to access \.\COM16

from ampy.

I saw the code you have implemented.

def windows_full_port_name(portname):
# Helper function to generate proper Windows COM port paths. Apparently
# Windows requires COM ports above 9 to have a special path, where ports below
# 9 are just referred to by COM1, COM2, etc. (wacky!) See this post for
# more info and where this code came from:
# http://eli.thegreenplace.net/2009/07/31/listing-all-serial-ports-on-windows-with-python/
m = re.match("^COM(\d+)$", portname)
if m and int(m.group(1)) < 10:
return portname
else:
return "\\.\{0}".format(portname)

The format seems to be correct. Maybe this is a problem when my Putty is also connected to the device
So, I killed Putty. I tried to run the command again. This time it get a different error that Ampy cannot enter the raw repl.

C:\Users\mikel>ampy --port COM16 put main.py
b'NLR jump failed, val=0x3ffb25ec\r\nets Jun 8 2016 00:22:57\r\n\r\nrst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)\r\nconfigsip: 0, SPIWP:0xee\r\nclk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00\r\nmode:DIO, clock div:2\r\nload:0x3fff0018,len:4\r\nload:0x3fff001c,len:5060\r\nload:0x40078000,len:8788\r\nho 0 tail 12 room 4\r\nload:0x40080400,len:6772\r\nentry 0x40081610\r\n\x1b[0;32mI (260) cpu_start: Pro cpu up.\x1b[0m\r\n\x1b[0;32mI (260) cpu_start: Application information:\x1b[0m\r\n\x1b[0;32mI (260) cpu_start: Compile time: 12:41:59\x1b[0m\r\n\x1b[0;32mI (262) cpu_start: Compile date: Mar 1 2019\x1b[0m\r\n\x1b[0;32mI (267) cpu_start: ESP-IDF: v3.3-beta1-268-g5c88c5996\x1b[0m\r\n\x1b[0;32mI (274) cpu_start: Single core mode\x1b[0m\r\n\x1b[0;32mI (278) heap_init: Initializing. RAM available for dynamic allocation:\x1b[0m\r\n\x1b[0;32mI (285) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM\x1b[0m\r\n\x1b[0;32mI (291) heap_init: At 3FFB92B0 len 00026D50 (155 KiB): DRAM\x1b[0m\r\n\x1b[0;32mI (298) heap_init: At 3FFE0440 len 0001FBC0 (126 KiB): D/IRAM\x1b[0m\r\n\x1b[0;32mI (304) heap_init: At 40078000 len 00008000 (32 KiB): IRAM\x1b[0m\r\n\x1b[0;32mI (310) heap_init: At 40092834 len 0000D7CC (53 KiB): IRAM\x1b[0m\r\n\x1b[0;32mI (316) cpu_start: Pro cpu start user code\x1b[0m\r\n\x1b[0;32mI (36) cpu_start: Starting scheduler on PRO CPU.\x1b[0m\r\n'
Traceback (most recent call last):
File "c:\users\mikel\anaconda3\lib\runpy.py", line 193, in _run_module_as_main
"main", mod_spec)
File "c:\users\mikel\anaconda3\lib\runpy.py", line 85, in run_code
exec(code, run_globals)
File "C:\Users\mikel\Anaconda3\Scripts\ampy.exe_main.py", line 9, in
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 722, in call
return self.main(*args, **kwargs)
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 697, in main
rv = self.invoke(ctx)
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 1066, in invoke
return _process_result(sub_ctx.command.invoke(sub_ctx))
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 895, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "c:\users\mikel\anaconda3\lib\site-packages\click\core.py", line 535, in invoke
return callback(*args, **kwargs)
File "c:\users\mikel\anaconda3\lib\site-packages\ampy\cli.py", line 263, in put
board_files.put(remote, infile.read())
File "c:\users\mikel\anaconda3\lib\site-packages\ampy\files.py", line 208, in put
self._pyboard.enter_raw_repl()
File "c:\users\mikel\anaconda3\lib\site-packages\ampy\pyboard.py", line 198, in enter_raw_repl
raise PyboardError('could not enter raw repl')
ampy.pyboard.PyboardError: could not enter raw repl

from ampy.

Ampy was able to flash the device with my main.py one time today. For that time, it did not generate any error. The main.py program runs good because it prints the message. Since then, I cannot duplicate the same success again.

I am going to reboot my PC and see if it helps.

from ampy.

Same error "could not enter raw repl.'

from ampy.

I have found the solution in this recent post. dhylands/rshell#27 The solution works consistently. I was confused with COM1x issue. It turns out to be the reset problem.

--------------------------------------hyper99 commented on Oct 4, 2018-------------------------------------
The simplified below code can reset ESP board when connecting, and no need hardware reset when reconnecting to ESP board on ESP8266 and ESP32 board.
in init() of class pyboard.py file.
self.serial = serial.Serial(device, baudrate=baudrate, interCharTimeout=1)
#--------added below--------------------
self.serial.setRTS(1) #EN=LOW
time.sleep(0.01)
self.serial.setRTS(0) #EN=HIGH
#------ added to here--------
break

from ampy.