samannoy Goto Github PK

arduino-to-apm

This project aims to use an arduino to send PWM pulses to APM to change Flight Modes that is normally done using 2.4GHz RC Controller

arduinoparallaxjoystick

Arduino Controlled 2-Axis Parallax Joystick

ardupilot

ArduPlane, ArduCopter, ArduRover source

autotunepidcontroller

bluetooth-control-rc-car

Bluetooth controlled RC Car with 2 motors running on differential drive system. The car can also work on voice commands from the app provided. You can also connect two devices to the car by adding relays and controlling them using the same arduino uno.

gps-tracker

ground-control-station

line-follower-robot-8-sensor

Line follower robot with 8 ir sensor array running on atmega 328(Arduino Uno or pro Mini) that is optimised to run smooth on a decent fast racing track with proper pid tuning

nrf24l01-drone-controller

Drone Remote Controller based on arduino and joystick module with NRF24L01 as transmitter

openbci_8bit

Firmware for OpenBCI_8bit Board along with Host and Device code

opencv

Open Source Computer Vision Library

rc_receiver_4_servo

An Arduino 2.4GHz, 4 channel receiver with standard servo outputs

stepperdriver

Arduino library for A4988, DRV8825, DRV8834, DRV8880 and generic two-pin (DIR/STEP) stepper motor drivers

tiltrotor

An attempt in developing source code for a tilt rotor aircraft

vehicle_detection_haarcascades

Vehicle Detection by Haar Cascades with OpenCV