Git Product home page Git Product logo

Comments (21)

rickyrockrat avatar rickyrockrat commented on July 27, 2024

Did you build from the source (tip of master?)
If not, you are not going to get an icon.
When you run parcellite does it print anything interesting out? Please post whatever it spits out when it starts.

from parcellite.

matthias-ccri avatar matthias-ccri commented on July 27, 2024

Good to know. No, I installed with apt

from parcellite.

felagund avatar felagund commented on July 27, 2024

By the way, when one uses the Makefile.simple installation method, one also does not get an icon.

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

The makefile.simple is a simple hack to get the binary built. I'm surprised the install worked. :) I need to finish the simple makefile solution to include man pages, desktop file, and the icon.

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

OK, I decided I just needed to finish this. Please check out master. It should work for you to install everything:
At the top level:
make -f Makefile.simple
sudo make -f Makefile.simple DESTDIR=/tmp/test.me

command line variables are DESTDIR (defaults to nothing) and prefix, which defaults to /usr
To install in /usr/local:

sudo make -f Makefile.simple prefix=/usr/local install

from parcellite.

felagund avatar felagund commented on July 27, 2024

Thanks! However, when doing make -f Makefile.simple fails with:

make[1]: Leaving directory '/home/drew/Zdroje_a_programy/Sources/parcellite/po'
make -C $(echo build.data|sed 's!build.!!') -f Makefile.simple GETTEXT_PACKAGE=parcellite
make[1]: Entering directory '/home/drew/Zdroje_a_programy/Sources/parcellite/data'
LC_ALL=C /usr/bin/intltool-merge  -d -u -c /po/.intltool-merge-cache ../po parcellite.desktop.in parcellite.desktop
No such file or directory at /usr/bin/intltool-merge line 396.
make[1]: *** [Makefile.simple:48: parcellite.desktop] Error 2
make[1]: Leaving directory '/home/drew/Zdroje_a_programy/Sources/parcellite/data'
make: *** [Makefile.simple:45: build.data] Error 2

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

Which git sha is that from? I just tried it from a fresh clone off master, and this does work:
is /usr/bin/intltool-merge there? I need to add it to my deps.

from parcellite.

felagund avatar felagund commented on July 27, 2024

/usr/bin/intltool-merge is there.

git rev-parse HEAD
112a625edf5f8b951a2faf526a54cd411cf8bc17

I also did this from a Frech clone master. I am on Kubuntu 21.10.

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

I've never looked at the intltools....they are in perl. How exciting. Can you please pull, then try again, and please dump the whole make output. I mainly want the versions that print out on tool discovery. Thanks!

from parcellite.

felagund avatar felagund commented on July 27, 2024

It gives out this:

make -f Makefile.simple
Checking for intltool-update intltool-extract intltool-merge pkg-config
Checking for intltool-update.. /usr/bin/intltool-update 'V=0.51.0' OK
Checking for intltool-extract.. /usr/bin/intltool-extract 'V=0.51.0' OK
Checking for intltool-merge.. /usr/bin/intltool-merge 'V=0.51.0' OK
Checking for pkg-config.. /usr/bin/pkg-config 'V=0.29.2' OK
    Need gtk+-2.0 x11 fontconfig and freetype2
Checking for gtk.. OK
Checking for X11.. OK
Checking for fontconfig.. OK
Checking for freetype.. OK
make -C $(echo build.po|sed 's!build.!!') -f Makefile.simple GETTEXT_PACKAGE=parcellite
make[1]: Entering directory '/home/drew/Zdroje_a_programy/Sources/parcellite/po'
file=`echo ca | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file ca.po
file=`echo cs | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file cs.po
file=`echo da | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file da.po
file=`echo de | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file de.po
file=`echo el | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file el.po
file=`echo es | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file es.po
file=`echo fr | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file fr.po
file=`echo hu | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file hu.po
file=`echo it | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file it.po
file=`echo ja | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file ja.po
file=`echo nb | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file nb.po
file=`echo pl_PL | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file pl_PL.po
file=`echo pl | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file pl.po
file=`echo pt_BR | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file pt_BR.po
file=`echo ro | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file ro.po
file=`echo ru | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file ru.po
file=`echo sv | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file sv.po
file=`echo tr | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file tr.po
file=`echo zh_CN | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po
file=`echo zh_TW | sed 's,.*/,,'`.gmo \
  && rm -f $file && /usr/bin/msgfmt -o $file zh_TW.po
make[1]: Leaving directory '/home/drew/Zdroje_a_programy/Sources/parcellite/po'
make -C $(echo build.data|sed 's!build.!!') -f Makefile.simple GETTEXT_PACKAGE=parcellite
make[1]: Entering directory '/home/drew/Zdroje_a_programy/Sources/parcellite/data'
LC_ALL=C /usr/bin/intltool-merge  -d -u -c /po/.intltool-merge-cache ../po parcellite.desktop.in parcellite.desktop
No such file or directory at /usr/bin/intltool-merge line 396.
make[1]: *** [Makefile.simple:48: parcellite.desktop] Error 2
make[1]: Leaving directory '/home/drew/Zdroje_a_programy/Sources/parcellite/data'
make: *** [Makefile.simple:47: build.data] Error 2

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

Thank you! We are running the same intltool. Line 396 the paste below. I assume I have a cache somewhere and you don't. I usually build in a chroot, and this is why. Thanks. I will try to find out what step I'm missing.
This is my output:

LC_ALL=C /usr/bin/intltool-merge  -d -u -c /po/.intltool-merge-cache ../po parcellite.desktop.in parcellite.desktop
Generating and caching the translation database
print() on closed filehandle CACHE at /usr/bin/intltool-merge line 375, <PO_FILE> line 6533.
Merging translations into parcellite.desktop.

Can you please do a find at the top level:
find . -name '.intltool-merge-cache'


sub get_cached_translation_database
{
    my $cache_file_age = -M $cache_file;
    if (defined $cache_file_age)
    {
        if ($cache_file_age <= &get_newest_po_age)
        {
            &load_cache;
            return;
        }
        print "Found too-old cached translation database\n" unless $QUIET_ARG;
    }

    &create_cache;
}

from parcellite.

felagund avatar felagund commented on July 27, 2024

You mean in the top level, so i.e:

rm parcellite/
git clone https://github.com/rickyrockrat/parcellite.git parcellite
cd parcellite/
make -f Makefile.simple
find . -name '.intltool-merge-cache'

That gives no output.

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

Yes, thank you. Can you try this on a clean checkout and report back with the contents of parcellite.desktop.

cd
make -f Makefile.simple
cd ../data
LC_ALL=C ../intltool-merge -d -u -c /po/.intltool-merge-cache ../po parcellite.desktop.in parcellite.desktop

from parcellite.

felagund avatar felagund commented on July 27, 2024

There is no parcellite.desktop, there is only parcellite.desktop.in ? These are the files in the data directory:

Makefile.am  Makefile.simple  parcellite.appdata.xml  parcellite.desktop.in  parcellite.png  parcellite-startup.desktop.in  parcellite.svg  parcellite.xpm

the parcellite-startup.desktop.in file is as follows:

 ```
[Desktop Entry]
_Name=Parcellite
_GenericName=Clipboard Manager
_Comment=Lightweight GTK+ clipboard manager
Icon=parcellite
Exec=parcellite
Terminal=false
Type=Application
Categories=GTK;GNOME;Application;Utility;
OnlyShowIn=GNOME;KDE;LXDE;MATE;Razor;ROX;TDE;Unity;XFCE;Old;LXQt;

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

The intltool-merge creates the parcellite.desktop from the .po files and the parcellite.desktop.in. The end result should be a really big .desktop file with every language in it.

from parcellite.

felagund avatar felagund commented on July 27, 2024

Well, it does not get created. In the po directory, there is no en.po, just [email protected] and [email protected]

My locales is as follows:

LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC=cs_CZ.UTF-8
LC_TIME=cs_CZ.UTF-8
LC_COLLATE="en_US.UTF-8"
LC_MONETARY=cs_CZ.UTF-8
LC_MESSAGES="en_US.UTF-8"
LC_PAPER=cs_CZ.UTF-8
LC_NAME=cs_CZ.UTF-8
LC_ADDRESS=cs_CZ.UTF-8
LC_TELEPHONE=cs_CZ.UTF-8
LC_MEASUREMENT=cs_CZ.UTF-8
LC_IDENTIFICATION=cs_CZ.UTF-8
LC_ALL=

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

I am completely mystified at this point. Just to be sure:

git clone https://github.com/rickyrockrat/parcellite.git test
cd test
make -f Makefile.simple

And you are telling me it errors out? I placed your locale info in a bash script with export in front of each entry then called make Makefile.simple and it built for me.

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

And while in the test directory, please report back this sha:
git log -n1 --pretty=format:%h
it should be 4eb98c9

from parcellite.

felagund avatar felagund commented on July 27, 2024

Yes, as you can see and it is at that commit. I am also puzzled:-):
Screenshot_20220223_110302
I am on KDE - could it be the reason, that I miss something from GNOME? Though Parcellite is not DE-dependent, is it?

from parcellite.

rickyrockrat avatar rickyrockrat commented on July 27, 2024

I check for the libraries Parcellite needs and It finds it, it's not related to KDE AFAIK. This is strange. It builds all the translations but can't seem to find it when it build. Can you please try editing data/Makefile.simple and replace:
INTLTOOL_MERGE = /usr/bin/intltool-merge
with
INTLTOOL_MERGE = ../intltool-merge
Then if that fails with the same message, leave the edit and add this one (remove the -c option):
LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $&lt; $@
LC_ALL=C $(INTLTOOL_MERGE) $(INTLTOOL_V_MERGE_OPTIONS) -d -u $(top_srcdir)/po $&lt; $@

I think it will do the same thing, but maybe...

from parcellite.

felagund avatar felagund commented on July 27, 2024

Yes

editing data/Makefile.simple and replace:
INTLTOOL_MERGE = /usr/bin/intltool-merge
with
INTLTOOL_MERGE = ../intltool-merge

makes it build.

There is a huge difference in versions:

$ intltool-merge --version
intltool-merge (intltool) 0.51.0
Written by Maciej Stachowiak, Darin Adler and Kenneth Christiansen.

Copyright (C) 2000-2003 Free Software Foundation, Inc.
Copyright (C) 2000-2001 Eazel, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

$ /home/drew/Zdroje_a_programy/Sources/parcellite/intltool-merge --version
intltool-merge (intltool) 0.37.1
Written by Maciej Stachowiak, Darin Adler and Kenneth Christiansen.

Copyright (C) 2000-2003 Free Software Foundation, Inc.
Copyright (C) 2000-2001 Eazel, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

from parcellite.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.