Comments (16)
in which button is mapped Fire II in the 8bitdo m30?
Because fire II and fire III should be mapped...
in any case, I could add an option to disable the "up-is-fire" feature, and map Fire II there
from bluepad32.
Fire II is not quite mapped in either case, my request is to map it. I prefer this config
M30
Button C (FIRE II)
SFC30
Button Y (FIRE II)
That would be a complete firmware with these mappings, an example game that requires this configuration is https://mcgeezer.itch.io/kung-fu-remaster and Arabian Nights.
from bluepad32.
I guess I should get an 8bitdo m30... the 3 Amiga buttons are already mapped... but I guess there is a bug with the M30
from bluepad32.
I've just ordered an 8bitdo M30... will arrive in a few days...
from bluepad32.
and to gain some time, could you tell me the Vendor ID (VID) and Product ID (PID) of those gamepads.
You can do it by connecting them, and them from the console type list_devices
and copy & paste the output here. Thanks!
UPDATE: In case you don't know how to attach a console, please read: https://gitlab.com/ricardoquesada/unijoysticle2/-/blob/main/docs/user_guide.md#console
from bluepad32.
Hi, the problem is the same on firmware 3.5.1 and 3.5.2 with hardware https://gitlab.com/SukkoPera/unijoysticle2 and https://github.com/ricardoquesada/unijoysticle2/tree/main/board/unijoysticle2 i have a rev F.
8bitdo M30 HID\VID_2DC8&PID_5006
8bitdo SFC30 HID\VID_2DC8&PID_AB21
Grab with UsbTreeView, do you need a full dump?
from bluepad32.
ahh... which firmware are you using? "unijoysticle" or "mightymiggy" ?
from bluepad32.
ahh... which firmware are you using? "unijoysticle" or "mightymiggy" ?
Only unijoysticle.
from bluepad32.
Mmm... probably that's the issue... "unijoysticle" is not expected to have the correct mappings for the SukkoPera's board.
Instead, you should use the "mightymiggy" version, which was developed by SukkoPera for his board.
from bluepad32.
Mmm... probably that's the issue... "unijoysticle" is not expected to have the correct mappings for the SukkoPera's board.
Instead, you should use the "mightymiggy" version, which was developed by SukkoPera for his board.
Unfortunately i connected unijoysticle c64 version to amiga same problem. I can test the sukkopera firmware mightymiggy, I'll let you know.
from bluepad32.
Yep. The original Unijoysticle2 (through-hole version) doesn't support 2nd/3rd buttons on the Amiga.
But the Unijoysticle 2+ / A500, they support it.
from bluepad32.
Tested mightymiggy 3.5.2 on Unijoysticle 2 - Amiga Version the controller is mapped.
M30
FIRE I BUTTON A
FIRE 2 BUTTON X
SFC30
FIRE 1 Y
FIRE 2 B
Unfortunately the Kensington Mouse (K75351WW) doesn't work with this FW.
if you could remap those 2 controllers with your firmware it would be a perfect, the mouse works fine.
from bluepad32.
it is not as simple remapping... the original Unijoysticle2 (trhough-hole) doesn't have the lines to control buttons 2/3 on joystick 2
from bluepad32.
here is the comparison table: https://gitlab.com/ricardoquesada/unijoysticle2
from bluepad32.
Ok, so we can consider this issue as closed, thanks for your support.
from bluepad32.
np.
from bluepad32.
Related Issues (20)
- Add setFlash option for Dualsense RGB LED HOT 2
- Timeout selection need for disconnected controller HOT 2
- PS4 esp32 HOT 3
- Add improved Rumble API: weak / strong magnitude, delayed start, and duration in ms HOT 1
- Arduino Nano ESP32 / Lolin S3 mini: Serial output not working HOT 3
- [Bug]: 8bitdo controllers go into constant rumble with new play_dual_rumble API HOT 25
- [Bug]: Pico SIGTRAP in Switch IMU parsing
- Filter gamepad connection HOT 2
- [Bug]: erro ao baixar pacote de placas HOT 7
- [Bug]: Failed to disconnect HIDS client for hids_cid=0, status=2 HOT 1
- [Bug]: 4.0.2 reports weird 99.99.99 version after flashing HOT 6
- [Bug]: More than three Xboxone handles will cause problems HOT 15
- [Bug]: Xbox One controller hangs on pairing HOT 8
- [Bug]: Warning message when Gamesir T3s connects HOT 1
- ESP32-C3 does not found Switch / 8Bitdo Controller but XBOX Wireless Controller HOT 3
- SDK Config Parameter for Analog->Digital presses HOT 1
- SDK parameter to control button remapping by position or lettering HOT 1
- ESP32 Pico D4 support HOT 2
- xiao_esp32c3 bluepad not show anything in serial monitor after reset HOT 1
- [Bug]: Regression - Rapidly calling Controller->setColorLED() creates errors HOT 6
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from bluepad32.