Changing temperature when on doesn't trigger MQTT status update about esp32-faikin HOT 4 CLOSED

Hmm, it probably should.

It does report via a home assistant specific message (prefixed with MAC), and a regular summary message starting Faikin/... but the state/... is not for a temperature change.

IIRC the idea was that you see live changes in temperature readings all the time and reporting every 0.1C change is OTT. There is a setting, live which can be enabled to override that.

It may make sense to force such an update on any control being changed, so I'll look at that too.

from esp32-faikin.

I checked almost every value, and that reports status back to the mqtt topic, only the temp not. I use 2 domotica software solution (homeassistant and FHEM), and fhem I use with the MQTT status

from esp32-faikin.

OK new code issued, see if that does what you need.

But if using for live temperature, then sending setting/airco/live 1 will get you a lot more state/... messages.

from esp32-faikin.

Great, that solves it. Thnx

from esp32-faikin.