RpiBoot - windows - fixed hardware-id about usbboot HOT 2 CLOSED

Theoretically you can create your own msd.elf by booting a linux kernel with gadget support and MSD support. You'll also need to drive the GPIO47 suitably to re-enable the eMMC after booting though

Take a look at the https://github.com/raspberrypi/scriptexecutor for help with building your own bit of code to do this...

Other possibility is to enable the gadget mode with ethernet device support so the Raspberry Pi will appear on the PC as another network port

from usbboot.

Thanks, i had a look into that. Actually i cirumvented the problem by registering to the wmi-event. its an event-handler, which notifies me with the usb-plug event.
That plug-event seems to be or is always the event from the previous execution of cmboot/rpiboot.exe

I did not know about scriptexecutor.
Gadget mode under windows7 as a usb-client, i think probably under linux i am able to do that i guess..

problem is also solved by convention, means, plug one cm3, then wait till finished, then plug the next.

from usbboot.