Problem with UART in hello_sleep example about pico-playground HOT 3 OPEN

I have the same issue while monitoring stdio via USB on Windows 10. Dormant mode appears to shut down things without properly re-enabling them on wake-up.
I implemented the recover_from_sleep function found here, but while that does fix some issues and appears to bring the clocks back up, it does not fix the USB and allow stdio to display on my monitor via PuTTY.

from pico-playground.

This is just a random guess (and may not actually be anything to do with your problem at all), but I wonder if Windows might be "getting confused" by the USB device suddenly becoming non-responsive, when the RP2040 goes to sleep?

from pico-playground.

Windows does seem to get confused, but I think this is more of a Pico issue than a Windows issue. I would think that a proper "wake up" after going dormant should reinitialize USB in such a way that Windows could recognize the device again. And as mentioned above, this also seems to be an issue on Mac. I've monitored the system clocks and by default the USB clock stays at 0Khz after waking up from dormant.

I tried to restore this manually but setting the clock back to its original value doesn't seem to be enough to get the connection working again.

from pico-playground.