If you use the MultiRX mode, and want to TX on the MultiRX VFO B frequency, you can, b

When Using MultiRX and TXing MultiRX closes after TX about thetis HOT 7 CLOSED

w3ub commented on July 21, 2024

When Using MultiRX and TXing MultiRX closes after TX

from thetis.

Comments (7)

ramdor commented on July 21, 2024

this doesn't happen for me. What version of Thetis are you using? have you tried a new database to see if something is messed up there? (backup old first)

from thetis.

w3ub commented on July 21, 2024

I am using 2.9.06. I reset the database, it still does it. I turn on MultiRX, then set the TX to VFO B. At this time, the MultiRX and SPLIT buttons are lit up. I set the TX to VFO B by clicking on TX at the top. But if I hit the PTT, I do indeed TX on the VFO B frequency, but the MultiRX button is no longer lit afterwards, and I am RXing on VFO A. I noticed this a year of so ago and commented but got no replies. I also use the CTUN option, with the zoom set to max and sampling rate at 384k. Doug

…

On Jan 5, 2023, at 9:55 AM, Richie ***@***.***> wrote: this doesn't happen for me. What version of Thetis are you using? have you tried a new database to see if something is messed up there? (backup old first) — Reply to this email directly, view it on GitHub <#65 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A337HFZVDLR2CLGJGYOWES3WQ3HGVANCNFSM6AAAAAATRFKNT4>. You are receiving this because you authored the thread.

from thetis.

w3ub commented on July 21, 2024

An update. Did it again. Started without CTUN on and DUP on (I usually have them on). It behaved properly. Engaged CTUN. Still OK. Engaged DUP, and now the problem occurs. So, 7000DLE Mk II, latest SW, Protocol 2, 384k, CTUN/DUP on, zoom at max. I think you’ll see the issue that way. Doug

…

On Jan 5, 2023, at 10:13 AM, Doug Schultz ***@***.***> wrote: I am using 2.9.06. I reset the database, it still does it. I turn on MultiRX, then set the TX to VFO B. At this time, the MultiRX and SPLIT buttons are lit up. I set the TX to VFO B by clicking on TX at the top. But if I hit the PTT, I do indeed TX on the VFO B frequency, but the MultiRX button is no longer lit afterwards, and I am RXing on VFO A. I noticed this a year of so ago and commented but got no replies. I also use the CTUN option, with the zoom set to max and sampling rate at 384k. Doug > On Jan 5, 2023, at 9:55 AM, Richie ***@***.*** ***@***.***>> wrote: > > > this doesn't happen for me. What version of Thetis are you using? have you tried a new database to see if something is messed up there? (backup old first) > > — > Reply to this email directly, view it on GitHub <#65 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A337HFZVDLR2CLGJGYOWES3WQ3HGVANCNFSM6AAAAAATRFKNT4>. > You are receiving this because you authored the thread. >

from thetis.

W2PA commented on July 21, 2024

I was not able to duplicate this exactly, but I did observe this weirdness between the SPLIT button and the TX button on VFOB. You can enter split mode by clicking on either button. I also have a MIDI button to activate SPLIT.

Turn on MultiRX
Click the SPLIT or use the MIDI SPLIT command - VFOB TX button lights up
Confirm that the MIDI SPLIT button still toggles correctly and re-engage SPLIT operation
Click the TX button on VFOB
Now you can no longer toggle SPLIT off using the MIDI button. You must use the console SPLIT button

I never use the TX button to enter split operation so I never noticed this before. Step 3 is optional. So is Step 1. Even if you don't touch the MIDI control, clicking the TX button seems to disable the SPLIT toggle via the MIDI interface.

One other weirdness noted: With MultiRX off, upon trying step 5 (toggling SPLIT off using the MIDI control), VFOB changes to the inactive color but the TX button remains lit. And SPLIT is indeed still active - when I transmit it's on VFOB's frequency.

Note: other MIDI commands seem to be unaffected, although I of course didn't try them all.

Maybe this bug is related to Doug's bug, which I can't seem to replicate.

Chris

from thetis.

ramdor commented on July 21, 2024

there is an issue with multirx when the split gap is greater than samplerate_rx1/2 when TX'ing. The maths breaks and I wont have a chance this evening to investigate further. Perhaps tomorrow now.

If you bring multiRX (vfob) frequency close to vfoA freq the multirx shouldn't drop out

from thetis.

w3ub commented on July 21, 2024

Yes, you got it. If I bring VFO B closer to VFO A the problem does not occur. Thanks for tracking it down! Doug

…

On Jan 5, 2023, at 2:02 PM, Richie ***@***.***> wrote: there is an issue with multirx when the split gap is greater than samplerate_rx1/2 when TX'ing. The maths breaks and I wont have a chance this evening to investigate further. Perhaps tomorrow now. If you bring multiRX (vfob) frequency close to vfoA freq the multirx shouldn't drop out — Reply to this email directly, view it on GitHub <#65 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A337HFY45AZDHGDPFTU6CHDWQ4EC5ANCNFSM6AAAAAATRFKNT4>. You are receiving this because you authored the thread.

from thetis.

ramdor commented on July 21, 2024

This is now fixed hopefully, although there may be some side effects I have missed.

from thetis.

When Using MultiRX and TXing MultiRX closes after TX about thetis HOT 7 CLOSED

Comments (7)

Related Issues (20)

Recommend Projects

React

Vue.js

Typescript

TensorFlow

Django

Laravel

D3

Recommend Topics

javascript

web

server

Machine learning

Visualization

Game

Recommend Org

Facebook

Microsoft

Google

Alibaba

D3

Tencent