Comments (7)
ramdor
commented on July 21, 2024
1
yes, s-meter calibration storage was unfortunately broken in 2.9.0.6. It will be fixed when 2.9.0.7 is released. I will leave this open until 2.9.0.7 hits so that others can read it.
Richie.
from thetis.
ramdor
commented on July 21, 2024
1
@w-u-2-o if you had previously saved a calibration with an older version of the software then that will be read in and all will look fine. However if you re-calibrate and get a different offset then that wouldn't have been saved with 2.9.0.6.
from thetis.
w-u-2-o
commented on July 21, 2024
Interesting. I can't duplicate this behavior.
Windows 10 Pro, Thetis 2.9.0.6 x64, ANAN-8000DLE, Firmware 2.1.18
I cannot duplicate your problem. I just dragged out all of my calibration equipment and there is no problem with the level calibration on my installation.
FWIW: when calibrating, pay attention to the S-meter, not necessarily the panadapter. Calibrate in Sig Avg mode. Make your bandwidth 500Hz.
When looking at the panadapter, ensure that the detector mode is average, the zoom is all the way zoomed in (minimum bandwidth), and that the bin width is adjusted to maximum. This should get the S-meter and the S-meter within 1dB of each other.
from thetis.
alexn3gx
commented on July 21, 2024
Scott,
The problem is not while calibrating the S-Meter on the ANAN, the problem
is Thetis remembering the calibration results which Richie confirmed.
Richie ***@***.***> Unsubscribe
9:19 AM (3 hours ago)
to ramdor/Thetis-2.9.0, me, Author
yes, s-meter calibration storage was unfortunately broken in 2.9.0.6. It
will be fixed when 2.9.0.7 is released. I will leave this open until
2.9.0.7 hits so that others can read it.
Richie.
…On Tue, Jan 3, 2023 at 12:13 PM w-u-2-o ***@***.***> wrote:
Interesting. I can't duplicate this behavior.
Windows 10 Pro, Thetis 2.9.0.6 x64, ANAN-8000DLE, Firmware 2.1.18
I cannot duplicate your problem. I just dragged out all of my calibration
equipment and there is no problem with the level calibration on my
installation.
FWIW: when calibrating, pay attention to the S-meter, not necessarily the
panadapter. Calibrate in Sig Avg mode. Make your bandwidth 500Hz.
When looking at the panadapter, ensure that the detector mode is average,
the zoom is all the way zoomed in (minimum bandwidth), and that the bin
width is adjusted to maximum. This should get the S-meter and the S-meter
within 1dB of each other.
—
Reply to this email directly, view it on GitHub
<#58 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AN72KSLHM6MWQE7NCVBSM3TWQRM2TANCNFSM6AAAAAATPXKRG4>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from thetis.
ramdor
commented on July 21, 2024
yes, unfortunately I removed a line accidentally.... fat finger issue ;)
rx_meter_cal_offset_by_radio[(int)current_hpsdr_model] = rx1_meter_cal_offset; // MW0LGE_[2.9.0.7] re-instated
It is all to do with the save and reload. I am tempted to release a 2.9.0.7 without meters just to get a couple of things squared away.
Richie.
from thetis.
alexn3gx
commented on July 21, 2024
Understood, that's a true statement. Again, the intent here is to identify
software bugs, and if I had done it that way, I would never notice such
bugs.
Since I started using the PowerSDR in the early days of the Flex SDR-1000,
I learned from the Tortoise group that it's a good practice to start a
fresh database on every new release.
On Tue, Jan 3, 2023, 3:12 PM Richie ***@***.***> wrote:
@w-u-2-o <https://github.com/w-u-2-o> if you had previously saved a
calibration with an older version of the software then that will be read in
and all will look fine. However if you re-calibrate and get a different
offset then that wouldn't have been saved with 2.9.0.6.
—
… Reply to this email directly, view it on GitHub
<#58 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AN72KSNP2QIF2WQ2CL7OEGDWQSB2HANCNFSM6AAAAAATPXKRG4>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from thetis.
ramdor
commented on July 21, 2024
closing, as it is now fixed, and will be resolved in 2.9.0.7 when released
from thetis.
Related Issues (20)
- [BUG] Audio stuttering when RX control adjusted HOT 1
- [BUG] If MIC slider is higher than 40dB, crash report! HOT 1
- [FEATURE]6m S Units definition (option) HOT 7
- [BUG]Error when Thetis 2.3.5 beta 2 .is launched,
- [Feature]Xvrtr settings are lost when importing a previously exported database HOT 4
- Add XVTR Antenna to XVTR setting HOT 2
- Add ZTS (zoom to segment) HOT 4
- [BUG] Something is wrong with the 2.10.3.6 and the new firmware HOT 10
- Using other than CAT1 to control HobbyPCB Amps Band Switching HOT 2
- Selection for Angelia stand alone in Radio Model in Thetis
- Add Auto TX/MOX to Wave Playback
- SD button not working in protocol 1 HOT 6
- [FEATURE] Up-slew (rise time) control present in WDSP 1.24
- Add (multi Rx) and (man multi notch filter) to Rx2
- Independent database folders for each radio selected HOT 5
- Memory Interface Thetis X64,[BUG] HOT 6
- [BUG] path illustrator broken, no connections are shown HOT 2
- Transmission of audio stream via TCI HOT 2
- Closing Thetis by a MIDI button results in message pane "please wait..." [BUG] HOT 1
- [FEATURE] Antenna analyzer built into Thetis
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from thetis.