Part orientation when installing about voron-2-mods HOT 2 CLOSED

Hi, on the voron 2.4, there is no need for any orientation, since you can mount them only "correct". It's the same housing for left/right.

On the Trident, i made a small hole thingy on the bottom, so that you "know" the orientation. Just don't remember if i mentioned it somewhere 🙈

The holes are intented to be same on top/bottom.
There are 2 reasons for that.

1. Some people use linear rails at the top as backers, with 2xM5 holes they won't fit.
2. On the 2.4 you don't need 2 different housings (you would need if the top had different holes as the bottom), that means additionally that you aren't able to mount them wrong.

Sry, im a bit late with replying, feel free to close the issue if it's solved 😂
Cheers

from voron-2-mods.

Thanks for the clarification, fully understand your rationale. I fitted them without a problem, was just an observation relating to the manual .

Great mod.

Hope to see it in the next Voron 2.4 release.

from voron-2-mods.