[MOUNT] about pyr0piezo HOT 1 CLOSED

If you just want some ideas of how to implement on your printer, have a look at the Railcore integration: https://docs.pyroballpcbs.com/mounts/core-xy/railcore-ii/

Re: Heated chamber - Likely you'll start experiencing reduced sensitivity around 80°C, which generally can be compensated for using configuration. Above that, you'll need to enhance the piezo elements somewhat, either by increasing the size of the elements used, or by providing some insulation, or building your enclosure such that the mechanical force of the nozzle touch is translated outside the heated area. Using a standard piezo disk in a 200°C chamber will likely result in serious signal suppression.

That's a problem that may be able to be overcome, however. While signal from the piezo elements would be suppressed, they would not be totally eliminated. I would need to change a couple of resistors on the sensor, but I believe I could modify the circuit to handle a much higher gain input for this scenario.

Anyhoo, if you'd like to explore options for a custom board or circuit, please feel free to reach out direct on Discord or [email protected]

from pyr0piezo.