Comments (13)
pwnbus
commented on July 17, 2024
1
I was able to replicate this issue when using the PrintTimeGenius plugin in a dev environment, and I believe I've got a fix for this in #5.
I'm gonna run a few more tests later this evening when I can get to my printer before I create and push out a release, which will most likely be in a day or two.
If folks are interested in testing the fix in the meantime (which would be greatly appreciated but certainly not expected), you can install it via the manual link https://github.com/pwnbus/OctoPrint-Progress-Title/archive/fix_progress_percentage.zip
Are folks using a printer time improvement plugin that is not PrintTimeGenius? If so, would you mind telling me which one so I can ensure it works with this fix please?
from octoprint-progress-title.
pwnbus
commented on July 17, 2024
1
Finally got around to verifying this code, and just created a new release (v0.1.1), thanks for the comments in the issue!
from octoprint-progress-title.
ToXIc-Dev
commented on July 17, 2024
I can confirm this is happening to me to but I cant seem to figure out why its happening.
Mine is the opposite though, the title is 2-5% behind the progress bar.
from octoprint-progress-title.
phcoetzee
commented on July 17, 2024
Update! I had a 8% difference today between the Octoprint progress bar and this OctoPrint-Progress-Title plugin!
from octoprint-progress-title.
pwnbus
commented on July 17, 2024
Hmm interesting, I haven't been able to replicate it at all on my end (in both octoprint in development mode, as well as running on my 3d printer).
Is it happening consistently? If you reload the page, does the difference go away?
from octoprint-progress-title.
phcoetzee
commented on July 17, 2024
Hi, yes it's happening constantly and no it doesn't get better if I do a F5
refresh.
Regards
Pieter Coetzee
…On Tue, 04 Feb 2020, 02:03 Brandon Myers ***@***.***> wrote:
Hmm interesting, I haven't been able to replicate it at all on my end (in
both octoprint in development mode, as well as running on my 3d printer).
Is it happening consistently?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#2?email_source=notifications&email_token=AJHN4X7JSBBS4WI6I4HD6E3RBCWDNA5CNFSM4KOT37N2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEKV3NJQ#issuecomment-581678758>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJHN4XYBEJEVPZGPD3QANTDRBCWDNANCNFSM4KOT37NQ>
.
from octoprint-progress-title.
pwnbus
commented on July 17, 2024
@phcoetzee Does it happen on all prints for you, or specifically the one? Is it possible for you to send the gcode to me so I can use it for testing?
from octoprint-progress-title.
phcoetzee
commented on July 17, 2024
Its happening with all my prints. Sorry cant send you the gcode.
…On Wed, 05 Feb 2020, 20:26 Brandon Myers ***@***.***> wrote:
@phcoetzee <https://github.com/phcoetzee> Does it happen on all prints
for you, or specifically the one? Is it possible for you to send the gcode
to me so I can use it for testing?
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#2?email_source=notifications&email_token=AJHN4X7CCPMLLHYM3Q3NIBLRBMAFVA5CNFSM4KOT37N2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEK4PBYY#issuecomment-582545635>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJHN4X6ZARUWPJAMGMCQBF3RBMAFVANCNFSM4KOT37NQ>
.
from octoprint-progress-title.
qkdefus
commented on July 17, 2024
keep happening to me too, title bar says 3% while octoprint reports 32%
using print time genius plugin, not sure if that affect it
from octoprint-progress-title.
qkdefus
commented on July 17, 2024
from octoprint-progress-title.
pwnbus
commented on July 17, 2024
Sorry for a bit of radio silence here.
That's a great point that using something like print time genius might be causing the inconsistency here. I'll see if I can replicate things on my side and if so, will try and come up with a fix.
from octoprint-progress-title.
qkdefus
commented on July 17, 2024
Great :) Thanks!
tor. 30. apr. 2020, 21:37 skrev Brandon Myers <[email protected]>:
… Sorry for a bit of radio silence here.
That's a great point that using something like print time genius might be
causing the inconsistency here. I'll see if I can replicate things on my
side and if so, will try and come up with a fix.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#2 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABDWZEH2CQ6QJBXGPE5BAETRPHHQLANCNFSM4KOT37NQ>
.
from octoprint-progress-title.
peppelorum
commented on July 17, 2024
This solves the issue for me! Well done! =)
from octoprint-progress-title.
Related Issues (2)
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from octoprint-progress-title.