error with pimox.sh about pimox7 HOT 7 CLOSED

I wrote a littel guide witch sohould get u going.
https://forum.proxmox.com/threads/how-to-run-pve-7-on-a-raspberry-pi.95658/

You can use the full automated install script, on a fresh flashed image, this will do all the configuration for you.

1. Flash and startup the latest image from https://downloads.raspberrypi.org/raspios_arm**64**/ .
2. sudo -s
3. curl https://raw.githubusercontent.com/TuxfeatMac/pimox7/master/RPiOS64autoinstall.sh > RPiOS64autoinstall.sh
4. chmod +x RPiOS64autoinstall.sh
5. ./RPiOS64autoinstall.sh
6. Follow Prompts

from pimox7.

Witch Base Image are you using?

Maybe give my auto installer a try? --> https://github.com/TuxfeatMac/pimox7 --> RPiautoinstall.sh

from pimox7.

2021-01-11-raspios-buster-armhf-lite

from pimox7.

buster = Debian 10.
you need Debian 11 aka bullseye.

Latest images from https://dietpi.com/ are build on Debian 11 and work well with pimox.

from pimox7.

also armhf is 32bit, you need 64bit.

from pimox7.

still get error, seems like something wrong of net,

Is there a sample confile for:

• /etc/network/interfaces, give the Pi a static IP address. You cannot use dhcp.
• /etc/network/interfaces, remove any IPv6 addresses.
• /etc/hostname, make sure the Pi has a name.
• /etc/hosts, make sure this hostname corresponds to the static IP you previous set.

from pimox7.

I think i roughly did whats described unser "system vorbereiten" https://www.bachmann-lan.de/proxmox-ve-auf-dem-raspberry-pi-4-installieren/

My setup is based in raspbian, so it might or might not work woth dietpi.
For Further Details in my successful setup See #1

from pimox7.