Not AX.25 on Direwolf about uvk5cec HOT 6 CLOSED

My Direwolf I-gate works with my UV-K5(8). Do you have the correct APRS frequency programmed in channels 169 and 170? What kind of radio is Direwolf connected to?

from uvk5cec.

The "message" part is not yet APRS spec compliant (see my previous comment).

However, for positioning, be sure you have your destination and digipath set correctly.

DEST - set it to an experimental "Z" destination. I have set mine to APZQSH

DIGI - set it to your digipath setting without the second digit. For examaple WIDE1

digiSSID - set it to your digipath second digit, for example 1 ... with the above setting, this should make the digipath WIDE1-1

The packet should now be ax.25 frame. Hopefully Ian KD8CEC gets to release and update soon with better message implementation.

from uvk5cec.

BTW, aside from checking the direwolf logs, you can also get into KISS terminal (e.g., kissutil) to "listen" to what direwolf hears. If the packet is mis-formatted, you will see it there, too.

from uvk5cec.

The "message" part is not yet APRS spec compliant (see my previous comment).

However, for positioning, be sure you have your destination and digipath set correctly.

DEST - set it to an experimental "Z" destination. I have set mine to APZQSH

DIGI - set it to your digipath setting without the second digit. For examaple WIDE1

digiSSID - set it to your digipath second digit, for example 1 ... with the above setting, this should make the digipath WIDE1-1

The packet should now be ax.25 frame. Hopefully Ian KD8CEC gets to release and update soon with better message implementation.

Thanks for the pointers, somehow on AprsDIG I use WIDE2-2 is the one that made as Not.AX25 packets.
So I follow your setting:

• AprsDIG: WIDE1
• digiID (menu 9) as 1
  and now I'm decoded properly (as YD0NXX-9), but with wrong LAT and LON values (I use decimal degrees format).

Thanks for the great work,

73 de Yono YD0NXX

from uvk5cec.

Further test shows the GPS decimal degrees for LAT and LON should be 3 decimals only

from uvk5cec.

As the problem is already resolved, I'm going to close this issue.

from uvk5cec.