Comments (13)
It is true that it doesn't work in many instances for me and it sounds like LtJaeger (above) was also able to get it partially working as well. I think we've safely proven it's mostly bugged :-)
from vaicompro-community.
I checked on my end:
"Select Channel" works for the F-14 as well as the F-16. Indications are changing as well on both Radios
"Select Channel" does NOT work on the F-18. The command is recognized, but I don't see any changes, neither to the used frequency nor to the channel indicator.
BUT for the command to work, the respective Radio has to be keyed. So it might be in line with Issue #25
from vaicompro-community.
Good feedback! Though it did not work in the F14 and F16 for me when I tested it. Let me go back and try some other cases to verify and make the appropriate edits. Though I think you are correct with the radio keys which I do not have bound or use as I use a singular VAICOM PTT. Those commands should be able to work without keying a radio.
from vaicompro-community.
FYI, in the F-16, Select Channel works in Single Player but not Multiplayer. I'm keying the actual radio when using the command.
from vaicompro-community.
They do not work if using a single PTT I have tried on the F14 F16 and F18.
FYI, in the F-16, Select Channel works in Single Player but not Multiplayer. I'm keying the actual radio when using the command.
You have your DCS radio bind shared with vaicom for those radios? I tried it in that configuration as well and have nothing changing.
from vaicompro-community.
They do not work if using a single PTT I have tried on the F14 F16 and F18.
FYI, in the F-16, Select Channel works in Single Player but not Multiplayer. I'm keying the actual radio when using the command.
You have your DCS radio bind shared with vaicom for those radios? I tried it in that configuration as well and have nothing changing.
Yes, I have separate PTT's for the UHF (COM1) and VHF (COM2) radios in Vaicom for the F-16. I'll try it out in the F-18.
from vaicompro-community.
They do not work if using a single PTT I have tried on the F14 F16 and F18.
FYI, in the F-16, Select Channel works in Single Player but not Multiplayer. I'm keying the actual radio when using the command.
You have your DCS radio bind shared with vaicom for those radios? I tried it in that configuration as well and have nothing changing.
Yes, I have separate PTT's for the UHF (COM1) and VHF (COM2) radios in Vaicom for the F-16. I'll try it out in the F-18.
I tried this configuration with no luck unfortunately. Confirming this is "Select Channel" command and its changing your radio preset number?
from vaicompro-community.
FYI, in the F-16, Select Channel works in Single Player but not Multiplayer. I'm keying the actual radio when using the command.
I did some additional testing and want to correct my previous post. I was only able to get this to work in the F-16. I was not able to ever get it to work in the F-18.
The problem does not appear to be different in Singleplayer vs Multiplayer but rather if the F-16 radio presets have been changed from defaults in the Mission Editor. In a generic mission like F-16 Free Flight in NTTR, the "Select Channel" command works to change both UHF and VHF radio channels (assuming you have PTT Tx 1 & 2 mapped to COM 1 & 2). It also worked on a Multiplayer server (like Rotorheads) if they have not changed the presets in the ME. However, if the presets have been changed in the ME, it doesn't work in either Single- or Multiplayer mode.
Also, you have to be very careful to say "Select Channel #" with no pause between the first and second word or the command does not work (it looks like it tries to process a Wingman command). For this reason, I added the keyword, "Preset #", in the Vaicom profile to avoid that confusion arising.
I hope that helps.
from vaicompro-community.
FYI, in the F-16, Select Channel works in Single Player but not Multiplayer. I'm keying the actual radio when using the command.
I did some additional testing and want to correct my previous post. I was only able to get this to work in the F-16. I was not able to ever get it to work in the F-18.
The problem does not appear to be different in Singleplayer vs Multiplayer but rather if the F-16 radio presets have been changed from defaults in the Mission Editor. In a generic mission like F-16 Free Flight in NTTR, the "Select Channel" command works to change both UHF and VHF radio channels (assuming you have PTT Tx 1 & 2 mapped to COM 1 & 2). It also worked on a Multiplayer server (like Rotorheads) if they have not changed the presets in the ME. However, if the presets have been changed in the ME, it doesn't work in either Single- or Multiplayer mode.
Also, you have to be very careful to say "Select Channel #" with no pause between the first and second word or the command does not work (it looks like it tries to process a Wingman command). For this reason, I added the keyword, "Preset #", in the Vaicom profile to avoid that confusion arising.
I hope that helps.
This is good information, though I could not even get it to work in a SP F16 instant action mission, so I know that changing the presets didnt impact it. It is physically changing the number preset on the radio and not just frequency/recipient?
Could you share your vaicom config and ptt settings so I can test those? I still cannot replicate it functioning.
from vaicompro-community.
Here are my PTT settings and the Vaicom Command change. I simply duplicated the "Select Channel" command and changed the spoken part to "Preset". I have to be keying TX1 (VHF AM) or TX2 (UHF) for it to work properly.
from vaicompro-community.
Could you share your vaicom config pages I mean, PTT Preferences. I still am unable to make this work.
from vaicompro-community.
Here you go... [Easy Comms aren't really on... Vaicom bug]
from vaicompro-community.
Haha yeah we are tracking that bug....
And my settings are identical other than "Display Info" and I still cannot see the channel presets change in the aircraft
from vaicompro-community.
Related Issues (20)
- [BUG] A10 C II Kneeboard defaults to ED controls pages HOT 5
- Alt and FLush methods called in VAICOMPRO.export.lua are not implemented HOT 4
- ptt.hotkey.TX?.press toggle listening instead of turning it on HOT 6
- [BUG] App Fails Silently if VoiceAttack has previously been installed but is not currently HOT 2
- [BUG] Communications menu keybinds don't work with vaicom HOT 3
- [BUG] 'Alt' (a nil value) errors in DCS logs HOT 3
- [BUG] When I do a Vaicom update it just opens the update.cmd file in Notepad++. Doesn't update.. HOT 4
- [BUG] -Latest Fallon update broke chatter HOT 1
- Flashing Jester wheel not yet resolved ? HOT 4
- Intercom (TX5) missing on Apache and Hind on Norm on PTT tab, Apache missing FM2 on Multi HOT 1
- Add Ability to Add Custom Chatter Audio HOT 2
- [FEATURE] Alternatives for TX Link in Multiplayer HOT 2
- Contact CORRECT ATC unit based on frequency HOT 1
- No project source license specified HOT 2
- [BUG] Latest DCS update seems to have broken Link Host command HOT 14
- [FEATURE] Mod Manager ready installation to deal with pure scripts servers HOT 2
- [BUG] "Finish" step doesn't work properly in VSPX mode HOT 2
- [BUG] Command Spoken Pharse Alerady Used HOT 5
- [BUG] HOT 2
- FC3 Not Detected HOT 14
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from vaicompro-community.