Comments (12)
Sorry for taking so long to get back to you. The first step is to install the driver and configure your printer as if it was a DCP-7030, and then check what works and what doesn't. Looking at the specs, the DCP-7055 seems pretty similar, so I expect pretty much everything will work with the driver as it is now.
For proper support, to get plug'n'play working, I'll need to know the printer's IEEE 1284 id. If you're on Linux, the following command should print it:
find /sys/devices -name ieee1284_id | xargs head; echo
from brlaser.
I will do it as soon as i get back home from trip.
The reason i asked you to add 7055 is because i am using this printer on raspberry pi print server. As you know there is no arm support from brother. I did raw printer on arm and install drivers to clients. If it works with brlaser i will be happy not to install all drivers to clients :)
I have also 7055 ppd file extracted from osx driver. In case if you need to see ppd file.
Thank you.
from brlaser.
linuxmint-desktop ~ $ find /sys/devices -name ieee1284_id | xargs head; echo
MFG:Brother;CMD:PJL,HBP;MDL:DCP-7055;CLS:PRINTER;CID:Brother Laser Type1;
linuxmint-desktop ~ $
PPD file is here. I modified for linux use. If you need original osx ppd I can share that too.
from brlaser.
Thanks for the ieee1284_id. It looks similar to the others that I've seen, so that is a good sign. Have you tried printing anything yet with the brlaser driver?
from brlaser.
It works :) I tried as 7065DN and printing good.
Just curious about how to add other options of my model. Like "Skip Blank Page", "Reduce Ghosting" etc.
from brlaser.
Well, first you need to know which command to send to the printer. In general, generate a print job with the setting disabled, then one with the setting enabled, and check what the diffference is. With these printers, it's pretty likely to be a PJL configuration command which will be obvious (I expect it will be something like @PJL SET REDUCE_GHOSTING=ON
). You might discover it just by running strings
on the driver.
To set up print-to-file with CUPS, look here: https://wiki.linuxfoundation.org/en/OpenPrinting/Database/CupsFAQ#How_do_I_print_to_a_file.3F One thing to watch out for is that CUPS is usually run in a sandbox (nobody trusts printer drivers :) ), and it might be that the only place you can create files is in /var/spool/cups/tmp/
.
Once you know how to control the feature, you can add a configuration flag to brlaser.drv.in
and a check for that flag in the source code. This is actually rather poorly documented. I have one option for toner-save mode which you can emulate, but I really don't know if I'm doing it the proper way.
(For "skip blank page" no printer support is needed of course. It would need a bit of refactoring though, as the driver currently doesn't read in an entire page before it starts outputting print data.)
from brlaser.
Thanks for info. I did some tests with Brother Generic LPR driver and PPD file. I can't find "Reduce Ghosting" param. What ever I change, just this params appear.
@PJL JOB NAME="Brother HL-XXX"
@PJL SET RAS1200MODE = OFF
@PJL SET RESOLUTION = 600
@PJL SET ECONOMODE = ON
@PJL SET SOURCETRAY = AUTO
@PJL SET MEDIATYPE = REGULAR
@PJL SET ORIENTATION = PORTRAIT
@PJL SET PAGEPROTECT = AUTO
@PJL ENTER LANGUAGE = PCL
No big dial. Just trying to understand and improve brlaser :)
from brlaser.
The PPD file that you have shared is no longer available, could you share it once more? Also, is there any chance to make the scanner work?
from brlaser.
Here it is: http://pastebin.com/HdHUCRm1
No idea about scanner. I just using Brother scanner drivers on my Linux.
from brlaser.
I've installed the x86 brother printer driver on the Raspberry Pi using QEMU emulation and that works fine. The scanner driver is installed to but SANE is unable to open the shared libraries...
from brlaser.
I've compiled and installed the brlaser driver on a Raspberry Pi and the printer works just fine. I'm even able to print with my iPhone using AirPrint. Should we close this issue?
from brlaser.
DCP-7055's seem to work fine. This issue has gotten pretty chatty, if there's something that still needs to be dealt with, please open a new issue.
from brlaser.
Related Issues (20)
- HL-L2335D working! HOT 1
- HL-L2312D prints garbage
- printer tested and working - Brother DCP-L2510D series
- HL-5140 works with Brother HL-5030 series driver
- Brother HL-2240D Works With HL-2220 Driver HOT 1
- Add Brother HL-5450DN as supported
- HL-L2350DW works on my machine (Gentoo)
- Shared printer could not be added on Windows 11 (always "connecting") due to numeric InputSlot
- Was wondering if you could add support to HL-3140CW
- brlaser fails halfway for many images, brother driver succeeds (HL-2270DW)
- Brother DCP-T310 does not work
- HL-2260D can print test page using HL-2270DW
- Bug report about printing.
- HL-L6410DN works flawlessly HOT 1
- Brother HL-L2300D works
- Brother HL-L2402D works with HL-L2300D driver HOT 1
- HL-L2370DW Works HOT 2
- HL-L2400DWE printer works
- MFC-8440 Works Using MFC-8860DN at 600dpi (1200dpi has problems)
- Brother MFC-L2690DW - works with MFC-L2710DW
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from brlaser.