Booting Windows To Go from a usb with uefi-ntfs about uefi-ntfs HOT 2 CLOSED

So, what would the steps be?

1. Download Rufus from here
2. Select a Windows ISO (or download it from within Rufus if needed)
3. Under Boot selection select Windows To Go
4. Click START

Note that using UEFI:NTFS will NOT have any incidence as to whether Windows To Go will work or not, as all it does is hand off to the Windows UEFI bootloader which will be exactly the same.

Therefore, unless your issue is with early boot and not being able to have your UEFI firmware executing the /efi/boot/bootx64.efi bootloader from the Windows partition, UEFI:NTFS will not help. And if that is indeed your issue, the method I described above, which will install UEFI:NTFS automatically if needed (but most likely won't, since it should create an ESP and install the Windows bootloaders there) should help.

from uefi-ntfs.

I thought the same thing about the handoff, but once with a laptop, no other boot method worked on USB, it would load off the OS or the setup, but it would always freeze or just stuck. Until I booted the same image with UEFI:NTFS. It was regarding windows.
I wrote about it here: https://superuser.com/a/1605528/35525

That's why when I have a case like this where I can't get into windows my instinct is to try UEFI:NTFS which worked on a machine which didn't want to boot any of many varieties of bootdisks (rufus, windows iso creator itself, refind, ventoy etc) Well it booted but just didn't get past the first blinking loading if I remember.

from uefi-ntfs.