Define more than one mail recepient with MailJet and SendGrid about fredy HOT 7 CLOSED

Interesting. At around 5k downloads, I never had such a request, even tho it makes sense. Will take a Look, thanks

from fredy.

@stoyanovgeorge I've created a pr for this. Can you please give it a review and a thumbs up if cool with you?

from fredy.

By the way, I accept pr's.. next time you can add this yourself. just saying ;)

from fredy.

I will test it tomorrow and update you here if there is a problem. Thanks a lot for your quick reaction.
Cheers!

from fredy.

@stoyanovgeorge did you have a chance to test this?

from fredy.

I tried to install it yesterday on my RPI4B and create a docker container and run it from there, but the problem was that in the process I have somehow managed to crash my board so hard, that it didn't respond after the restart and I was not able to connect to it over SSH, so I have stopped. I will try to recover the board today and see if it would work. My problem was that in the past, the fredy stopped working after a while and I decided to give Docker containers a try.

from fredy.

it took me a while since my SD card on my RPI4B apparently failed and I needed to replace it, re-install the PI and install Fredy from scratch.

One annoyance is that changing settings requires a restart and I don't know of an easy way to perform this restart. And more than once it was not accepting my changes.

from fredy.