Comments (16)
RICCIARDI-Adrien
commented on June 13, 2024
Linux Mint Debian Edition 5 seems to be based on Debian 11.
Try libpng-dev instead, but I don't know if you will be able to compile.
from opentomb.
RahRah80
commented on June 13, 2024
Hello.
Ok.
Don't know if i can, but i will try.
I have linux full time since 2019, if don't know i'll find a way to
resolved. If i can't i ask you.
Thank you.
…On Mon, Dec 19, 2022 at 12:57 PM Adrien RICCIARDI ***@***.***> wrote:
Linux Mint Debian Edition 5 seems to be based on Debian 11.
Try libpng-dev instead, but I don't know if you will be able to compile.
—
Reply to this email directly, view it on GitHub
<#611 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATDEDIL2CHS5SMSXRRQNRH3WOBLSRANCNFSM6AAAAAAS6WO63E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from opentomb.
RahRah80
commented on June 13, 2024
Hello.
It have already installed the libpng-dev
***@***.***:~/git/CroftEngine/build/src$ sudo apt-get install
libpng-dev
[sudo] password for rah-rah:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
libpng-dev is already the newest version (1.6.37-3).
The following packages were automatically installed and are no longer
required:
libbrotli-dev:i386 libexpat1-dev:i386 libfreetype-dev:i386
libpng-dev:i386 libqt5location5 libqt5multimedia5 libqt5multimediawidgets5
libqt5positioningquick5 libqt5websockets5 libqt5xmlpatterns5 python3-mock
python3-pbr
python3-pyqt5.qtmultimedia python3-pyqt5.qtopengl
python3-pyqt5.qtpositioning python3-pyqt5.qtquick python3-pyqt5.qtsql
python3-pyqt5.qtsvg python3-pyqt5.qtwebchannel python3-pyqt5.qtwebkit
python3-pyqt5.qtwebsockets
python3-pyqt5.qtxmlpatterns
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
…On Mon, Dec 19, 2022 at 12:57 PM Adrien RICCIARDI ***@***.***> wrote:
Linux Mint Debian Edition 5 seems to be based on Debian 11.
Try libpng-dev instead, but I don't know if you will be able to compile.
—
Reply to this email directly, view it on GitHub
<#611 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATDEDIL2CHS5SMSXRRQNRH3WOBLSRANCNFSM6AAAAAAS6WO63E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from opentomb.
RICCIARDI-Adrien
commented on June 13, 2024
Hi,
OK, are you able to compile then ?
from opentomb.
RahRah80
commented on June 13, 2024
Hello.
I can compile the game, just can't run because i get this:
***@***.***:~/git/CroftEngine/build/src$ ./croftengine
[2022-12-20 15:21:40.987222] [0x00007f2293178340] [info] Check user data
dir: "/home/rah-rah/git/CroftEngine/build/src"
[2022-12-20 15:21:40.988409] [0x00007f2293178340] [info] User data dir:
"/home/rah-rah/git/CroftEngine/build/src"
[2022-12-20 15:21:40.988747] [0x00007f2293178340] [info] Check user data
dir: "/home/rah-rah/git/CroftEngine/build/src"
[2022-12-20 15:21:40.988801] [0x00007f2293178340] [info] User data dir:
"/home/rah-rah/git/CroftEngine/build/src"
failed to load translations for QLocale(English, Latin, United States) /
"en_US"
terminate called after throwing an instance of
'boost::wrapexcept<std::runtime_error>'
what(): Missing required game file(s)
…On Tue, Dec 20, 2022 at 1:08 PM Adrien RICCIARDI ***@***.***> wrote:
Hi,
OK, are you able to compile then ?
—
Reply to this email directly, view it on GitHub
<#611 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATDEDIPCTAYL542AE2MBBS3WOGVUJANCNFSM6AAAAAAS6WO63E>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from opentomb.
stohrendorf
commented on June 13, 2024
@RahRah80 this is the wrong project.
from opentomb.
RICCIARDI-Adrien
commented on June 13, 2024
Thanks @stohrendorf, I didn't notice ! Indeed it was strange to me to see Qt-related errors in OpenTomb.
from opentomb.
RahRah80
commented on June 13, 2024
Hello.
Sorry about that, trying many games.
Compiled OpenTomb, for Tomb Raider 1 "OpenTomb/data/tr1/data" and the games
files DATA, EXTRAS and FMV
I ran the game, new game, press Ctrl but i can't select Tomb Raider 1 to
star.
Something missing or i'm not doing something right?
Thank you.
…On Tue, Dec 20, 2022 at 5:33 PM Steffen Ohrendorf ***@***.***> wrote:
@RahRah80 <https://github.com/RahRah80> this is the wrong project.
—
Reply to this email directly, view it on GitHub
<#611 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATDEDINUS4IR2IEFHZSEQM3WOHUXBANCNFSM6AAAAAAS6WO63E>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
from opentomb.
RICCIARDI-Adrien
commented on June 13, 2024
Hi,
Do you have any log message in the console, like some files were not found because of the file name case sensitivity ?
from opentomb.
RahRah80
commented on June 13, 2024
Hello.
There is no output error, the game engine seems to run fine, just can't
select a game to play if is Tomb Raider 1 or other.
Can scroll up and down and nothing more.
I used gdb with game and got this:
***@***.***:~/GAMES/Linux/OpenTomb$ gdb ./OpenTomb
GNU gdb (Debian 10.1-1.7) 10.1.90.20210103-git
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from ./OpenTomb...
(No debugging symbols found in ./OpenTomb)
(gdb) r
Starting program: /home/rah-rah/GAMES/Linux/OpenTomb/OpenTomb
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7fffed00c700 (LWP 3325)]
[New Thread 0x7fffe7fff700 (LWP 3326)]
[New Thread 0x7fffdffff700 (LWP 3327)]
[New Thread 0x7fffe77fe700 (LWP 3328)]
[New Thread 0x7fffe6ffd700 (LWP 3329)]
[New Thread 0x7fffe67fc700 (LWP 3330)]
[New Thread 0x7fffe5ffb700 (LWP 3331)]
[New Thread 0x7fffe57fa700 (LWP 3332)]
[New Thread 0x7fffe4ff9700 (LWP 3333)]
[New Thread 0x7fffdf7fe700 (LWP 3334)]
[New Thread 0x7fffdeffd700 (LWP 3335)]
[New Thread 0x7fffde7fc700 (LWP 3336)]
[New Thread 0x7fffddffb700 (LWP 3337)]
[New Thread 0x7fffdd7fa700 (LWP 3338)]
[New Thread 0x7fffdcff9700 (LWP 3339)]
[New Thread 0x7fffa7fff700 (LWP 3340)]
[Thread 0x7fffa7fff700 (LWP 3340) exited]
[New Thread 0x7fffa7fff700 (LWP 3341)]
[Thread 0x7fffa7fff700 (LWP 3341) exited]
[New Thread 0x7fffa7fff700 (LWP 3342)]
[Thread 0x7fffa7fff700 (LWP 3342) exited]
[New Thread 0x7fffa7fff700 (LWP 3343)]
[New Thread 0x7fffe47f8700 (LWP 3344)]
[Thread 0x7fffe47f8700 (LWP 3344) exited]
[New Thread 0x7fffa77fe700 (LWP 3345)]
[Thread 0x7fffa77fe700 (LWP 3345) exited]
[New Thread 0x7fffa77fe700 (LWP 3346)]
[New Thread 0x7fffe4777700 (LWP 3347)]
[New Thread 0x7fffdc7f8700 (LWP 3348)]
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 153
Warning: Can not read file "save/qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 153
Warning: Can not read file "save/qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 153
Warning: Can not read file "save/qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 153
Warning: Can not read file "save/qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 153
Warning: Can not read file "save/qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 153
Warning: Can not read file "save/qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367
Warning: Can not create file "qsave.lua"
[Thread 0x7fffa7fff700 (LWP 3343) exited]
[Thread 0x7fffdc7f8700 (LWP 3348) exited]
[Thread 0x7fffe4777700 (LWP 3347) exited]
[Thread 0x7fffa77fe700 (LWP 3346) exited]
[Thread 0x7fffdeffd700 (LWP 3335) exited]
[Thread 0x7fffdf7fe700 (LWP 3334) exited]
[Thread 0x7fffe4ff9700 (LWP 3333) exited]
[Thread 0x7fffe5ffb700 (LWP 3331) exited]
[Thread 0x7fffe67fc700 (LWP 3330) exited]
[Thread 0x7fffe57fa700 (LWP 3332) exited]
[Thread 0x7fffdcff9700 (LWP 3339) exited]
[Thread 0x7fffddffb700 (LWP 3337) exited]
[Thread 0x7fffdd7fa700 (LWP 3338) exited]
[Thread 0x7fffde7fc700 (LWP 3336) exited]
[Thread 0x7fffe6ffd700 (LWP 3329) exited]
[Thread 0x7fffe77fe700 (LWP 3328) exited]
[Thread 0x7fffe7fff700 (LWP 3326) exited]
[Thread 0x7fffdffff700 (LWP 3327) exited]
[Thread 0x7fffed00c700 (LWP 3325) exited]
[Inferior 1 (process 3321) exited normally]
(gdb) bt
No stack.
(gdb)
No stack.
(gdb) q
***@***.***:~/GAMES/Linux/OpenTomb$
The error of (Warning: Can not create file "qsave.lua"
"/home/rah-rah/git/OpenTomb/src/game.cpp" str = 367) and (Warning: Can not
create file "qsave.lua" "/home/rah-rah/git/OpenTomb/src/game.cpp" str = 153)
is when pressed F5 and F6
Thank you.
…On Wed, Dec 21, 2022 at 1:30 PM Adrien RICCIARDI ***@***.***> wrote:
Hi,
Do you have any log message in the console, like some files were not found
because of the file name case sensitivity ?
—
Reply to this email directly, view it on GitHub
<#611 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATDEDIKJBUIGM47DWLFTCATWOMA7BANCNFSM6AAAAAAS6WO63E>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
from opentomb.
RICCIARDI-Adrien
commented on June 13, 2024
Default menu controls are a bit strange because this is TeslaRus mapping, not the original games one.
Use A or S to navigate between menu tabs, then press Left Ctrl to enter a menu tab (the focus rectangle will change on screen). Use W and S to navigate up and down and Left Ctrl to select. There is also Escape to go up.
from opentomb.
RahRah80
commented on June 13, 2024
Hello
The Escape doesn't go back and left control enters the menu, but won't
lauch the game tr1
…On Wed, Dec 21, 2022 at 3:23 PM Adrien RICCIARDI ***@***.***> wrote:
Default menu controls are a bit strange because this is TeslaRus mapping,
not the original games one.
Use A or S to navigate between menu tabs, then press Left Ctrl to enter a
menu tab (the focus rectangle will change on screen). Use W and S to
navigate up and down and Left Ctrl to select. There is also Escape to go up.
—
Reply to this email directly, view it on GitHub
<#611 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATDEDIJYLQWRQQLJSRVLDE3WOMOHHANCNFSM6AAAAAAS6WO63E>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
from opentomb.
RICCIARDI-Adrien
commented on June 13, 2024
You can make sure that all TR1 files are named well and at the correct location, the game is expecting these files : https://github.com/opentomb/OpenTomb/blob/master/scripts/gameflow/TR1.lua.
from opentomb.
RahRah80
commented on June 13, 2024
Hello.
I had too many data directories.
Can select the game with left control, escape key doesn't work and can't
skip fmv sequences.
During game the enter key keeps jumping level... console opens after fmv
ends not during.
Can't crouch with V, F5 and F6 doesn't.
mlook 1 or 0 not working
…On Thu, Dec 22, 2022 at 10:02 PM Adrien RICCIARDI ***@***.***> wrote:
You can make sure that all TR1 files are named well and at the correct
location, the game is expecting these files :
https://github.com/opentomb/OpenTomb/blob/master/scripts/gameflow/TR1.lua.
—
Reply to this email directly, view it on GitHub
<#611 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATDEDIK64LOSEJDZ25XB6LTWOTFXPANCNFSM6AAAAAAS6WO63E>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
from opentomb.
RICCIARDI-Adrien
commented on June 13, 2024
Hi,
Great if you are able to play !
If I recall well, you can't crouch in TR1 or TR2, this feature has been introduced in TR3, so this is normal.
FMV skipping was working before, maybe it is broken now. I don't have a playbable installation to test now.
from opentomb.
RahRah80
commented on June 13, 2024
Hello.
It's working, thanks.
Merry Christmas and Happy New Year!
…On Sun, Dec 25, 2022 at 11:16 AM Adrien RICCIARDI ***@***.***> wrote:
Hi,
Great if you are able to play !
If I recall well, you can't crouch in TR1 or TR2, this feature has been
introduced in TR3, so this is normal.
FMV skipping was working before, maybe it is broken now. I don't have a
playbable installation to test now.
—
Reply to this email directly, view it on GitHub
<#611 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ATDEDIMKCVSC3GDJDJXDVGLWPAUJLANCNFSM6AAAAAAS6WO63E>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
from opentomb.
Related Issues (20)
- [Weapons] First animation is not used ?!
- Inventory ring size not based window size
- [Camera] no angle_y defined for underwater.
- Question about autoexec.lua CVARs
- Development questions HOT 11
- Cannot play TR5 movies. HOT 1
- Is the developer of this still here? HOT 46
- Bug report [missing audio] HOT 2
- Change switch-case for std::pair in controls.cpp HOT 1
- Ragdolls?
- Game white screens then closes HOT 3
- Linux support? HOT 2
- Help compiling for linux HOT 3
- Is project dead? No updates in 2 Years? HOT 9
- Error compiling on Linux HOT 1
- Overwriting game saves is buggy
- Stepping left and right bugs.
- One occasion where a bat did not stop animating and making a noise after death
- Certain bits of terrain, after attempting to jump up onto a platform, it's possible to fall through it
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from opentomb.