BladeRF A4 Problem about bladerf-adsb HOT 9 CLOSED

@damianpri the xA4 ADS-B image is available https://nuand.com/fpga/adsbxA4.rbf

from bladerf-adsb.

I do the following:

$ git clone https://github.com/Nuand/bladeRF-adsb
$ cd bladeRF-adsb/bladeRF_adsb
$ wget http://nuand.com/fpga/adsbxA4.rbf
$ make
$ ./bladeRF_adsb

./bladeRF_adsb
Failed to set TX VGA1 gain: Operation not supported
Couldn't configure TX module: Operation not supported

where is the problem? thanks

from bladerf-adsb.

It seems that 36d5d31 only added flashing support for the 2.0. The tx and rx params seem incompatible.

from bladerf-adsb.

More specifically, txvga1 and txvga2 should be dsa, and LNA gain should be full on the xA4/9.

from bladerf-adsb.

but now I have the following error:

/bladeRF_adsb$ ./bladeRF_adsb
Failed to set samplerate = 80000: Provided parameter was out of the allowable range
Couldn't configure TX module: Provided parameter was out of the allowable range

from bladerf-adsb.

Hello
I'm still having the same problem...

./bladeRF_adsb
Failed to set TX VGA1 gain: Operation not supported
Couldn't configure TX module: Operation not supported

any suggestion of the solution in the configuration? thanks

from bladerf-adsb.

./bladeRF_adsb
[INFO @ host/libraries/libbladeRF/src/helpers/version.c:106] FPGA version (v0.10.2) is newer than entries in libbladeRF's compatibility table. Please update libbladeRF if problems arise.
Failed to set samplerate = 80000: Provided parameter was out of the allowable range
Couldn't configure TX module: Provided parameter was out of the allowable range
damian@damian-CITeA:~/SDRv2/bladeRF-adsb/bladeRF_adsb$

from bladerf-adsb.

I have the same problem with my A4. Unsupported samplerate. Did anyone ever get their A4 working with the bladeRF-adsb?

from bladerf-adsb.

Issue should be fixed, closing.

from bladerf-adsb.