Trying to study an external geometry file in SOWFA about sowfa HOT 3 OPEN

Hi Daniel,
SOWFA-6 has working tutorials showing how to use an STL geometry to model a terrain (here). You should give SOWFA-6 a try, as it is working fairly well, even though the whole code is still in the dev branch. Note that SOWFA-6 requires OpenFOAM 6.

Let us know if you have any issues running that example case.

-Regis

from sowfa.

Dear Regis,
Thanks you very much for your answer. Indeed, it will be very helpfull to me. I will try the SOWFA-6 as well as the OF6. When i finished thee xample i will send my feedback for sure.

Best Regards

Daniel

from sowfa.

Hi Daniel,
SOWFA-6 has working tutorials showing how to use an STL geometry to model a terrain (here). You should give SOWFA-6 a try, as it is working fairly well, even though the whole code is still in the dev branch. Note that SOWFA-6 requires OpenFOAM 6.

Let us know if you have any issues running that example case.

-Regis

Dear Regis,
Is there any installation instructions for this SOWFA 6. The information that i found for the SOWFA 2.4.0 is still valid? In the Readme file on the SOWFA-6 repository is declared that OpenFOAM 2.4 is required.

Thanks again

Daniel

from sowfa.