Comments (9)
Hi, th e plugin does not read the harmony database, but the conf stored in your hub. Can you check that the conf is still ok on harmony app, or print in debug the list of commands in the plugin ?
from homebridge-harmony.
Thanks Nicolas. Interesting. Well, when I set showCommandsAtStartup to true and restart, I don't see a list of commands in the log as I've been able to see before. But if I look in the Harmony app on my phone, all looks correct - all of the devices are there and the usual commands it provides are there too - I'm assuming that is what you mean by the "conf stored in your hub". I will note that I have not updated Homebridge and node themselves for some time (and certainly not between when this all worked recently and now). I am running 1.4.0 of Homebridge and 16.14.2 of node.js. But since all worked with those releases 3 weeks ago, it seems like that would not be the cause.
from homebridge-harmony.
Ok, could you provide a full log ? (in debug mode if possible) ?
from homebridge-harmony.
Ok.. haven't done debug before - is that the switch in Homebridge Settings that says it sets -d ? I assume that the "full log" you need is everything shown in the Homebridge log from the time of restart, yes?
from homebridge-harmony.
I assumed my thoughts above are correct and saved a log with debug on (showCommandsAtStartup still set to true) and attached it. Thanks for your help.
HomebridgeDebugLog.txt
from homebridge-harmony.
Do you have what you need? Any ideas yet on the problem?
from homebridge-harmony.
Hi, you hub config does not return any commands, "controlGroup": [] is empty for all your devices. Did you try to sync your hub once again through Harmony app ? Have no clue of why, but the conf is empty ...
from homebridge-harmony.
It looks like my hub was developing some sort of problem when I opened this issue. Because in the last couple of days the light on the hub changed to solid red indicating it is offline even though my router says it is connected and the Harmony app still says it is connected to the hub and shows all of the Activities and Devices as usual but don't work. Very confusing. If you have any ideas I'd be happy to hear.
I have since tried updating node and homebridge to latest releases but your plugin resulted in homebridge going into a start/shutdown loop. I've downgraded to node 18.18.0 and disabled your plugin so that my other plugins can still operate. If possible, it would be good if you could update the plugin so that it can gracefully fail and not cause that loop.
from homebridge-harmony.
Found this thread while troubleshooting this exact issue today and figured I'd share what fixed it for me. FWIW even tho I had my ip set, it had changed somehow and changing it to the correct ip still resulted in the situation listed by op. I rebooted my harmony hub, removed the device from HomeKit then deleted the plug in entirely. Downloaded it again and when I readded the device into the home app all of the scenes showed back up and is working flawlessly.
from homebridge-harmony.
Related Issues (20)
- Volume for a Device HOT 1
- Crash after updating 1.6.2 --> Error: WebSocket closed with reason: undefined (undefined). HOT 1
- Help to start HOT 2
- [FEATURE] - More Accessory types, choosable separately for each device, e.g. "window blinds" for IR-controlled projector screens or window blinds HOT 1
- Not all hubs are loaded HOT 1
- [solved] Returns "Error retrieving info from hub .... connect EHOSTUNREACH" but IP is correct HOT 3
- [BUG] Only a few buttons show up in the Apple TV Remote app HOT 2
- [FEATURE] Generic "do nothing" command for non stateless switches HOT 1
- Hue Sync Samsung App HOT 1
- Add Correct name to the Accessories HOT 1
- Don't see devices in HomeKit App [BUG] HOT 5
- Guide for using Siri with this plugin, especially with switching Activities? HOT 2
- [BUG] EHOSTUNREACH error HOT 1
- Allow spaces in Device Mapping commands input
- [BUG] The `sortInput` setting does not seem to work HOT 5
- An option to Trigger Switch flip while activity is starting or stopping HOT 1
- [BUG] Cannot add TV accessory due to setup code already being used by another plugin HOT 5
- [FEATURE]Publish a device as a sensor to indicate if it is on/off. HOT 1
- [BUG] When using Siri or home app : activities toggle remains off and activities does not appear on remote HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from homebridge-harmony.