Free Swap chart suggestion about netdata HOT 3 CLOSED

Well, initially I wanted to display percentages at the top, to give a better overview of the machine.

However, network and disk do not have a max value, so a percentage cannot be calculated (internally a percentage is calculated to render the charts, but this based on the max of the visible area - showing that percentage by number was misleading).

On the other hand, turning the memory charts to absolute values introduces more problems.

For example, to have any meaning, "swap" should be "swap used" and RAM should be "available RAM". They are opposite.

Then, "available RAM" as an absolute number is also wrong. I have "1GB" RAM available. Is it good or bad? You can't tell. But if we show "10% available RAM", you know this is bad. So, I have concluded to show them the way they are now.

from netdata.

Using percentages for the overview are flawless and the values for Network and disk are reasonable. It gives an overview over the system usage without needlessly overwhelm the user.
I just instinctively interpreted a full circle as bad and an empty/low one as good (at least on my workstation).
But i understand your thought and there you are coming from, so i accept your decision and thank you for this excellent monitoring tool. I enjoy having this overview and the visualization that makes real-time system monitoring easy and enjoyable.

from netdata.

ok. Thanks!
I close it. You can re-open it any time.

from netdata.