Comments (18)
Ouch, I've missed this issue. If you try to open the developer tools console, do you get any errors there?
from simple-thermostat.
No errors. The only messages (warnings, info, etc) are as shown:
from simple-thermostat.
Also having this issue.
from simple-thermostat.
Weird it not working at all, but I did some changes to this in v0.22 that were just released. Any improvements after upgrading to that?
from simple-thermostat.
This now works for me. It flickers sometimes, but works.
from simple-thermostat.
No change. I made sure I cleared my cache after installing.
Please let me know if there anything I can do to help troubleshoot.
from simple-thermostat.
Is this a dual high/low device or just a single temperature @flyboy013 ?
Could you share the device attributes from HA? (Or did you already share it in some other issue?)
from simple-thermostat.
The problem occurs on both single and dual controls. I have three instances for floor heat and three for HVAC systems.
Here's the floor heat:
- sensors:
- entity: sensor.front_floor_heat_status
name: Status
- entity: sensor.front_floor_heat_silverleaf_level
name: SL Level
type: 'custom:simple-thermostat'
hide:
state: true
temperature: true
decimals: 0
name: Front
step_size: 1
entity: climate.front
and the HVAC:
- sensors:
- entity: sensor.ambient_temp_1
name: Now
- entity: sensor.front_zone_status
name: Status
type: 'custom:simple-thermostat'
hide:
state: true
temperature: true
modes:
Fan Only:
name: FAN
icon: 'mdi:fan'
Auto Heat/Cool:
name: HEAT/COOL
icon: 'mdi:help'
Cool:
name: COOL
icon: 'mdi:snowflake'
Heat:
name: HEAT
icon: 'mdi:fire'
'Off':
name: 'OFF'
icon: 'mdi:power-off'
decimals: 0
name: Living Room
step_size: 1
entity: climate.living_room
from simple-thermostat.
Can you go to <your-domain:port>/dev-state
and find the devices there and then copy the value in the attributes column @flyboy013 ?
It seems like all logic is running as in it calls the service after a second after the last button click, but the temperature seems to get reset to the previous temperature right after you click and thus it sends the existing temperature to the service call. I have a few ideas for what might be causing this but I want a little bit more of information to get a better understanding of your setup.
from simple-thermostat.
Here are the attributes for the two devices:
operation_list: Off,Heat
operation_mode: Off
target_temp_step: 1
max_temp: 95
min_temp: 50
current_temperature: null
temperature: 65
supported_features: 129
friendly_name: Front
aux_heat: off
operation_list: Off,Cool,Heat,Auto Heat/Cool,Fan Only
operation_mode: Off
max_temp: 90
min_temp: 50
fan_mode: Auto
supported_features: 2246
friendly_name: Living Room
target_temp_high: 71
target_temp_step: 1
temperature: 21
current_temperature: 69
fan_list: Auto,Low,High
target_temp_low: 64
from simple-thermostat.
I've been done some more troubleshooting of this issue. I created a new MQTT HVAC entity in my configuration.yaml file.
climate thermostats:
- platform: mqtt
name: Test
I then setup the lovelace UI for it:
- type: custom:card-modder
style:
--st-font-size-xl: 32px
card:
type: 'custom:simple-thermostat'
name: Test
entity: climate.test
I have tested this card out both with my 3000+ line lovelace interface as well as a 20 line skeleton. Also tested it with a gutted configuration.yaml file. I have found that when I comment out the mqtt section in my configuration.yaml, the problem seems to go away. Not quite sure why, but I figured I would provide the insight in case you have any ideas.
from simple-thermostat.
Another update. I have found that if I shutdown the bridge application that is posting all the data to my MQTT broker, the problem goes away. It would appear that the HA MQTT subscription message processing (or perhaps the bridge application's publishing) is causing the problems. The test climate (mqtt platform) entity does not have any mqtt variables so it shouldn't be an issue of new data overwriting existing values. So it would appears that this may be more of an issue between HA MQTT processing and the climate entity, but I don't yet have enough data one way or another.
from simple-thermostat.
I am seeing something... similar to this, but just wanted to comment here.
I'm using celsius and have noticed a few things:
• Nothing in console
• Side by side with built in thermostat, updating the built in one updates this guy instantly
• My step is set to 0.5 degrees for celsius.
• If I click rapidly to make it change a full degree, it seems to work!
Could this be fractional degrees related?
from simple-thermostat.
To add to this, the simple thermostat doesn't seem to show fractional setpoints either:
from simple-thermostat.
@flyboy013 It does sound a bit like the set temperature service is called correctly but the value is discarded or overwritten later on? When I find time I will try to configure a void MQTT thermostat to see if I can get the same issue locally.
@terafin It doesn't sound like the same issue. Do you have step size set in backend or as config to the card? One thing that is lacking is that the card does not read step size from the climate entity when its available. I will register an issue to make sure I get that in for a next release at some point.
from simple-thermostat.
@nervetattoo I have the step size configured on the card, and the platform is venstar (which as far as I can see doesn't support step size - but seems to work with the native card).
My config for simple-thermostat is:
decimals: 1
entity: climate.study
hide:
state: true
temperature: false
step_size: 0.5
type: 'custom:simple-thermostat'
from simple-thermostat.
I have a similar problem with version 0.25.0
But it is a bit random, mostly when I increase or decrease the counter fast.
Then it jumps back to a previous number (not necessarily the initial one)
Sometimes it also brings a 0.5 in there.
This is the config I have:
Lovelace
- cards:
- entity: climate.hybel_lille_soverom
name: Lille soverom
step_size: 1
type: 'custom:simple-thermostat'
configuration.yaml
- platform: generic_thermostat
name: "Hybel lille soverom"
heater: switch.esp01_mill02_relay
target_sensor: sensor.esp01_mill02_temperature
max_temp: 28
No messages in the developer console
from simple-thermostat.
I'm having this issue also. I imagine that it is due to that it doesn't wait few seconds before aplying the new temperature value, and lovelace triggers a refresh and it gets messed up.
You should wait for two seconds and abort previous click events before calling the setTemperature function. Something like this should help:
https://stackoverflow.com/questions/17690193/delaying-click-event
from simple-thermostat.
Related Issues (20)
- Updating color
- Enable Follow Me mode on the Cielo Breez units (Breez Max)
- Localization for modes none, eco, away, sleep, home, comfort HOT 4
- Project status HOT 2
- Translate State HOT 1
- Can’t find a way to change font size or background colour HOT 4
- Enable use of template sensors
- Weird layout with none parsed texts for preset and control HOT 4
- invert property for faults
- Water-heater entity support
- Please help to fix config screen have something wrong to can't adjust card
- Unwanted text before hvac modes HOT 5
- Error viewing card HOT 4
- How change color fan-only icon on aqua?
- custom element doesnt exist simple thermostat - on my ipad HOT 1
- away_indefinitely being displayed HOT 1
- Using Ecobee via Homekit displays "ui.card.climate.operation" header for modes HOT 1
- add buttons for vane_horizontal
- Heat/Cool missing button
- Minimal temperature threshold option
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from simple-thermostat.