get_lldp_neighbors about napalm-hp-procurve HOT 4 OPEN

Hi @msiegy, thanks for your report. I missed it somehow, sorry for that. Now I'm getting notifications from this repo too.

Could you please give me the full output of show lldp info remote-device on your device? That can help me a) build a test for this use case to prevent regression and b) fix the problem in the first place.

Thanks a lot.

from napalm-hp-procurve.

@msiegy Hi Matt,

can you get me the output of show lldp info remote-device please? That helps understanding what is going on.

thanks.

from napalm-hp-procurve.

@ixs I have been looking at his issue, I have also been having this issue as well. I am using a 5406zl2 Switch

Output of remote-device detailed

` LLDP Remote Device Information Detail

Local Port : B5
ChassisType : local
ChassisId : 00000000-0000-0E00-000...
PortType : mac-address
PortId : a0 0a f0 00 0e b0
SysName :
System Descr : ProLiant DL360 Gen10
PortDescr : PCI-E Slot 1, Port 1
Pvid :

System Capabilities Supported :
System Capabilities Enabled :

Remote Management Address
Type : ipv4
Address : XXX.XXX.XXX.XXX
Type : all802
Address : a0 0a f0 00 0e b0
`

Appears the OID is .1.3.6.1.4.1.9.9.23.1.2.1.1.6.37.1 = STRING: "00000000-0000-0E00-0000-000000000000"

from napalm-hp-procurve.

Works after adding "ChassisId": "lldpRemChassisId" to key_mib_table

from napalm-hp-procurve.